varminter185
New member
OK so I did load development for this rifle, 5 years ago. Beginner mistakes and have completely unusable data, fast forward, to last month finally live somewhere I can shoot regularly.. the remainder of my bullets that printed 5 in a nice little clover leaf ran out not before I pulled 3 at random, determine that it was 38 grains of blc2 behind a 36 gun varmint grenade, I make up a bunch more and now I'm all over the paper and back at square 1, what could be the issue I only used 2 types of powder then it was extruded varget, and ball blc2 so I know that for sure, should I try again with the blc2 and toy with neck tension? Neck size only, trimmed new loads I have been trying are causing sticky bolt lift , (no visible case pressure signs that I know about flattened or bulging primers etc ) just sticky bolt chronograph was saying 4400+ fps much to high for my liking.
It's a 26" heavy barrel free floated, 1:12 twist, I used to like this rifle but I'm feed up at this point!
It's a 26" heavy barrel free floated, 1:12 twist, I used to like this rifle but I'm feed up at this point!