Greg Young in Naples, FL did the barrel work on these.
I bought a couple of barrels from Greg a while back, and sent him my actions for the installation work.
Both of them showed up at my door a little over 4 weeks later, and I dropped them in HS stocks that I had ready to go.
Here's the first one:
It's a Brux 8 twist Varmint contour 26" long in an older HS Precision "VS" stock. I dropped a Timney in it last week.
Greg chambered it in .243 Ackley. I've got a decent 105 A-Max load worked up for it, and I had no problem ringing a steel silhouette at 945 yards a couple of weeks ago.
And, here's the second one:
It's a Rock 8 twist Varmint contour 22" long in an HS Precision "LTR" stock.
Greg chambered this one in .223 Ackley.
We shot it a couple of weeks ago with some fire-forming 75 A-Max loads, and by buddy LOBO151 wadded 5 up in a single spot on a steel plate at 400 yards.
I've been working on a load in Ackley brass the last couple of days, and I think I've found one with RL-15.
Sorry, they're not the required 5-shot groups, but they are 3 consecutive 4-shot groups at 100 yards so they ain't too shabby for the 10x scope.
Thanks Greg!!
Greg Young
Southern Precision Rifles
239-289-2338
I bought a couple of barrels from Greg a while back, and sent him my actions for the installation work.
Both of them showed up at my door a little over 4 weeks later, and I dropped them in HS stocks that I had ready to go.
Here's the first one:
![IMG_0996.jpg](http://i11.photobucket.com/albums/a168/fw707/IMG_0996.jpg)
It's a Brux 8 twist Varmint contour 26" long in an older HS Precision "VS" stock. I dropped a Timney in it last week.
Greg chambered it in .243 Ackley. I've got a decent 105 A-Max load worked up for it, and I had no problem ringing a steel silhouette at 945 yards a couple of weeks ago.
And, here's the second one:
![IMG_0999.jpg](http://i11.photobucket.com/albums/a168/fw707/IMG_0999.jpg)
It's a Rock 8 twist Varmint contour 22" long in an HS Precision "LTR" stock.
Greg chambered this one in .223 Ackley.
We shot it a couple of weeks ago with some fire-forming 75 A-Max loads, and by buddy LOBO151 wadded 5 up in a single spot on a steel plate at 400 yards.
I've been working on a load in Ackley brass the last couple of days, and I think I've found one with RL-15.
![IMG_1004.jpg](http://i11.photobucket.com/albums/a168/fw707/IMG_1004.jpg)
Sorry, they're not the required 5-shot groups, but they are 3 consecutive 4-shot groups at 100 yards so they ain't too shabby for the 10x scope.
Thanks Greg!!
Greg Young
Southern Precision Rifles
239-289-2338
Last edited: