Originally Posted By: Rich44Originally Posted By: FairChase93Rich 44 what is your overall length on the 17/204?
2.305 with a 30gr Kindler Gold, 2.229 with a 30gr Berger both are seated .015 off I think the chamber was cut with 0 freebore but I'm not positive, there are a couple of other guys that used the same reamer they may have a better memory than me since there much younger
Originally Posted By: barkI was curious what the C.O.A.L. was on the 20-250 with a 55 grain bullet and then with a 40 grain bullet as well.
Thanks, Rich. I have an oly arms UMAR in 22-250 that I thought would be cool to rebarrel to 20-250, but it looks like it's going to be too long.
The C.O.L for the 55gr Bergers is 2.579 I have not tried any 40's but the 45gr Blackhole with the Lexan tip is 2.502 both seated .015 off I'm pretty sure this chamber was cut with .050 freebore
2.305 with a 30gr Kindler Gold, 2.229 with a 30gr Berger both are seated .015 off I think the chamber was cut with 0 freebore but I'm not positive, there are a couple of other guys that used the same reamer they may have a better memory than me since there much younger
Originally Posted By: barkI was curious what the C.O.A.L. was on the 20-250 with a 55 grain bullet and then with a 40 grain bullet as well.
Thanks, Rich. I have an oly arms UMAR in 22-250 that I thought would be cool to rebarrel to 20-250, but it looks like it's going to be too long.
The C.O.L for the 55gr Bergers is 2.579 I have not tried any 40's but the 45gr Blackhole with the Lexan tip is 2.502 both seated .015 off I'm pretty sure this chamber was cut with .050 freebore