Plant.One
Well-known member
Originally Posted By: TheBig1I can't go with a set screw. I took my trigger assembly out and found that my lower isn't tapped.
nothing a 1/4x28 tap wont solve. its threaded most of the way thru, all you need to do is finish the process. couple drops of cutting oil and make sure you dont cross thread the tap when you start it in the existing threads and life is good.
many lowers arent tapped all the way thru, no big deal. its just aluminium
nothing a 1/4x28 tap wont solve. its threaded most of the way thru, all you need to do is finish the process. couple drops of cutting oil and make sure you dont cross thread the tap when you start it in the existing threads and life is good.
many lowers arent tapped all the way thru, no big deal. its just aluminium