Scope Rail Extended to the Rear for Thermal

[too_many_hobbies]

For those looking for a scope rail that extends to the rear for use with a thermal, I found this Contessa PH47-NV for a Winchester XPR in 7mm-08. Made in Italy. I ordered through Contessa USA. I also ordered a PH76-NV for a Bergara MgMicro Lite in 6.5 Creedmoor that will become my new night rifle for predator hunting. The PH76-NV comes with 6-48 and 8-40 screws. The MgMicro Lite requires 8-40 screws.

 

[Galt]

Is there a rail that will clamp onto a rail to extend it even farther back.

 

[dirtytough]

Is there a rail that will clamp onto a rail to extend it even farther back.

Yes. A rail riser with a cantilever. If you search Rail Riser some will pop up.

 

[cmatera]

Up to 108 MOA Windage, Elevation & Amp; Reach Back, Adjustable Picatinny Mount. Pard NV008 P, LRF | Eaglevisioncam

Please note you can’t fit pard 008S on this. The bracket cut on this model is 8mm, while the new pard 008S has a 9mm bracket. You may need to machine it to 9mm. We have designed and developed an amazing new picatinny mount. We are very proud of this product as its development resolves [...]

eaglevisioncam.com

It works for many optics, and they have other models.

 

[alf]

I've had a couple of these to mount the Super Hogster to my 700's;

https://www.precisionreflex.com/bases/119-rem-700-sa-8-7-8-full-1913-base-w-rear-eye-relief.html%20t=_blank

 

[greengt88]

I've had a couple of these to mount the Super Hogster to my 700's;

https://www.precisionreflex.com/bases/119-rem-700-sa-8-7-8-full-1913-base-w-rear-eye-relief.html%20t=_blank

You saved me a lot of Google searching, thanks for posting this one