Coyote-conquest
Member
I drove an hour and a half yesterday to see what I could find to load for my 2 new 6.5 CM's. I have a few powders that will work but have really nice loads for other cartridges that I try to reserve them for. I did have a few lbs of AA 4350 that I can use. Any way.
I found a great little shop This place had several pounds of H4350 for $51 or $53 a lb. I can't remember which. He also had several lbs of Rel 15, Rel 17 and Rel 19 for $57 a lb. Several lbs of IMR 4350 and IMR 4381 for $37. Several lbs of CFE 223, 6.5 STABALL and many more that I'm forgetting. He said he does up to $25,000 a day in business just in powder.
I couldn't get away with buying the H4350 with out the old lady killing me so I bought a few lbs of IMR 4350 which was cheaper and a lb of 6.5 STABALL.
Does anybody have a good load for IMR 4350 or AA 4350 with ELD match 140s, 140 gr Sierras or 143 ELDx's. I know some people refuse to help thinking it won't be accurate or you'll blow up a gun. But usually if you find a good load in one gun it will work in several. Not always but otherwise manufacturers wouldn't have match ammo.
I don't have a whole lot of bullets and components to shoot 50 rounds or more doing load work ups so any help would be appreciated.
Thanks for any help.
I found a great little shop This place had several pounds of H4350 for $51 or $53 a lb. I can't remember which. He also had several lbs of Rel 15, Rel 17 and Rel 19 for $57 a lb. Several lbs of IMR 4350 and IMR 4381 for $37. Several lbs of CFE 223, 6.5 STABALL and many more that I'm forgetting. He said he does up to $25,000 a day in business just in powder.
I couldn't get away with buying the H4350 with out the old lady killing me so I bought a few lbs of IMR 4350 which was cheaper and a lb of 6.5 STABALL.
Does anybody have a good load for IMR 4350 or AA 4350 with ELD match 140s, 140 gr Sierras or 143 ELDx's. I know some people refuse to help thinking it won't be accurate or you'll blow up a gun. But usually if you find a good load in one gun it will work in several. Not always but otherwise manufacturers wouldn't have match ammo.
I don't have a whole lot of bullets and components to shoot 50 rounds or more doing load work ups so any help would be appreciated.
Thanks for any help.
Last edited: