ny hunter
Member
been doing some research on reloading #4 buck in 23/4 & 3" its getting mind numbing,i jumped the gun and bought the components before checking the load data.didn't know it was so specific with shells and wads until i bought a few manuals [lyman 5th ed. shotshell reloading & complete reloading manual].i figured it would be like rifle and pistol reloading wrong.
i followed this load except for the hull i used a federal
L0AD# 100113-1657 “Cold Weather”
HULL: FIOCCHI 12 gauge 2.75” “UGLY COYOTE”
PRIMER: FIO616
PROPELLANT: IMR SR4756 32.0 Grains
WAD: VP65 (Mica dust the wad)
SHOT: 1-1/2 ounce (656 grains) Large lead shot
BUFFER: none
FOLD CRIMP: 6-point
Result: PSI 11500 FPS 1260
now i not sure if i should shoot them or disassemble them??
i followed this load except for the hull i used a federal
L0AD# 100113-1657 “Cold Weather”
HULL: FIOCCHI 12 gauge 2.75” “UGLY COYOTE”
PRIMER: FIO616
PROPELLANT: IMR SR4756 32.0 Grains
WAD: VP65 (Mica dust the wad)
SHOT: 1-1/2 ounce (656 grains) Large lead shot
BUFFER: none
FOLD CRIMP: 6-point
Result: PSI 11500 FPS 1260
now i not sure if i should shoot them or disassemble them??