Last spring I went on a South Dakota pheasant and snow goose hunt. I purchased a new Remington 11-87 Sportsman, 12 ga. It can shoot 2 3/4 or 3" shells. I was using the Kent Fasteel in 3" BB. I had problems with the gun cycling the shells. The gun was oiled well. I had shot it before but only 2 3/4" shells at the range.Had no problems then. This was first time with the 3" shells. The gun would fire and eject the spent shell, the new shell would lodge in the receiver/ejection port and appeared as if there was some contact with the top of the shell and the top/inside of the receiver. Has anyone has experienced this type of problem? Is it a new gun issue and it will wear in or a manufacturer issue? Thanks for your help.
breacher
breacher