Inxslung12
New member
i am reloading 6x45, for a remington 700 ,18" krieger. Using once fired .223 brass works fine. I decided to splurge and purchased some new lapua .223 match. I am using a Short Base rcbs die.
The shoulder is not getting sized well enough and the rounds won't feed into the chamber.
I have lubed the neck thinking the expander is pulling the shoulder up on the way out. Same result.
I'm wondering if the short base die is the problem?
Next test, I loaded up some of the lapua with .223 , and fire some. Than try to reload once fired lapua. Will be purchasing a full length redding die as well this week.
Any thoughts or suggestions would be appreciated
The shoulder is not getting sized well enough and the rounds won't feed into the chamber.
I have lubed the neck thinking the expander is pulling the shoulder up on the way out. Same result.
I'm wondering if the short base die is the problem?
Next test, I loaded up some of the lapua with .223 , and fire some. Than try to reload once fired lapua. Will be purchasing a full length redding die as well this week.
Any thoughts or suggestions would be appreciated