RugerHawg
New member
I have always had a gunsmith mount my scopes, but my gunsmith passed away. So, I decided to do it on my own. I did my research and bought good scope mounts, rings, and scopes. I degreased (using 91% rubbing alcohol) the scope mount, scope rings, and all of the screws. I torqued all the screws (using a torque wrench) to the in/lbs that the manufactuer said to. I put blue loctite on the scope base screws only. I put nothing in between the scope base and the rifle. I also leveled the scope with the rifle. I just wanted to know if I did a good job or not.? Thanks!
Last edited: