possumal
New member
Here is my method of creating a tripod adaptor for my Fusion. It involves a tripod I purchased for $16.95 from a seller named Altatac on eBay, including shipping. It is 20" high set up at its lowest neight, and is 20" long when folded up to carry, and weighs 1 lb. 9 oz..
The adaptor consists of the quick connect from the tripod, attached with 2 rivets to a piece of aluminum plate, 6 1/2" long and 2" wide, and 2 small sheet metal screws. I'll be glad to help anyone with details if you pm me.
You can also epoxy a 3/4" nut to the bottom of the Fusion and then screw the quick connect screw into that. I much prefer my system especially when it is extremely cold, as I can set up in under 15 seconds, solid as can be. I sometimes use the SP60 speaker with the Fusion, and simply hang it on the tripod handle or lay it on a nearby stump or rock. Here are a couple of pictures:
The adaptor consists of the quick connect from the tripod, attached with 2 rivets to a piece of aluminum plate, 6 1/2" long and 2" wide, and 2 small sheet metal screws. I'll be glad to help anyone with details if you pm me.
You can also epoxy a 3/4" nut to the bottom of the Fusion and then screw the quick connect screw into that. I much prefer my system especially when it is extremely cold, as I can set up in under 15 seconds, solid as can be. I sometimes use the SP60 speaker with the Fusion, and simply hang it on the tripod handle or lay it on a nearby stump or rock. Here are a couple of pictures: