6mm-204. 6x47 ackley improved load data

S

sethperry

New member
Anyone have load data for the 6mm-204ruger or 6x47AI ? Looking for 55 an 58 grain loads.. wondering if aa2200 is an option...
I did try to look it up in the fourm but keeps telling me no results to many key words? Kinda new here guessing I'm doing it wrong...
TIA!
 
I use 2230. When I built mine there was data available for the 6x47 Rem (6mm-222 Rem Mag) BR round and it's variation. I also use other 6mm BR rounds with comparable capacities to figure out loads starting way below safe and working up. A few years ago the Hogdon data magazine had an article on the 6mm-204 data in it.

Ackleyman here has been working with it recently.

I. Built mine in 2006, found a good 55gr NBT load for it and finally retired it last year and used the action to build a 20P as I already have 22-204 6x45 and 25-204.
 
AWS said:
I use 2230. When I built mine there was data available for the 6x47 Rem (6mm-222 Rem Mag) BR round and it's variation. I also use other 6mm BR rounds with comparable capacities to figure out loads starting way below safe and working up. A few years ago the Hogdon data magazine had an article on the 6mm-204 data in it.

Ackleyman here has been working with it recently.

I. Built mine in 2006, found a good 55gr NBT load for it and finally retired it last year and used the action to build a 20P as I already have 22-204 6x45 and 25-204.
Click to expand...
Thank you! I'll should look an see if the 6x6.8 is close in capacity... I always see load data for that
 
Back
Top