Anybody here handload for big bores? .366's and up?

[arlaunch]

I am going to start loading 45-90 in a week or two when i can get back to the bench.

 

[hydehunter]

depending on the bullet you load ,mine runs close to 4.00 every time I pull the trigger for reloads with Hammer Bullets

 

[Zastava223rem]

Originally Posted By: Plant.Onegonna be getting into loading both 45-70 and 458 win mag. cousin has a couple and wants some help learning to load for them, espeially the 458 due to ammo cost.

should be fun

.45-70 is probably one of the easiest to load for. Really fun. I use a stout load of Varget with the hard cast and IMR3031 for the Jacketed SP

 

[SmoothYote]

.416 Taylor. I get fantastic groups with the 400gr Hornady round nose but I can't recall my powder charge off the top of my head right now...

 

[highbrow]

50 BMG. 660 fmj up through 800gr bronze bullets. Usually do 215-230gr of IMR 5010 or H50BMG. Recoil in a 35 pound rifle is not bad at all but muzzle blast is significant. Don’t shoot under cover. Get about 30 rounds per pound of powder.

 

[Dultimatpredator]

375 RUM... Wastes alot of powder like my 300 RUM. A pound of powder dosent last long at a 100 plus grains per load. I also load 450BM, 44 mag, and 45 colt.

 

[Rotty]

.45/70 and.50bmg
Only killed a coyote with 1 of the 2, guess which one it was lol