AR barrel threading question… - PredatorMasters Forums

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at

Search Predator Masters

You are not logged in. [Log In] Predator Masters Home » Forums » Hunting » Hunting Suppressed » AR barrel threading question…

Topic Options

#3283410 - 10/12/21 09:46 PM AR barrel threading question…
RustyCJ8 Seasoned Member Registered: 06/03/08 Posts: 361 Loc: Iowa	A quick question for those who have had their AR barrel threaded. Did you send the upper in with or without the BCG? Thanks, Dave _________________________ Not all those who wander are lost. J. R. R. Tolkien
Top

#3283414 - 10/12/21 10:07 PM Re: AR barrel threading question… [Re: RustyCJ8]
crapshoot Retired PM Staff Registered: 03/22/02 Posts: 23492 Loc: Henderson,Nevada,USA	Doesn't matter. _________________________ I carry a gun because a cop is to heavy. Average response time for a 911 call is 10 min. Average response time for a .45acp is 900FPS. Remember, if you're not pissing off a liberal......You are one! Ted Nugent
Top

#3283452 - 10/13/21 01:56 PM Re: AR barrel threading question… [Re: RustyCJ8]
SlickerThanSnot PM senior Registered: 01/31/14 Posts: 5957 Loc: stuck in a fence	they don't need the bcg (if that is what you are wondering).. and they would probably prefer you didnt. for your sake and theirs if it was to get misplaced somewhere. _________________________ skeptical is what i am when told there is a dead coyote in certain far off pictures.
Top

#3283631 - 10/16/21 11:45 AM Re: AR barrel threading question… [Re: RustyCJ8]
Tonester Die Hard Member Registered: 04/20/13 Posts: 502 Loc: SE Nebraska	Send the barrel in by itself. TC _________________________ There is only one Lawgiver and Judge, the one who is able to save and destroy. But you--who are you to judge your neighbor? James 4:12
Top

#3283657 - 10/16/21 07:31 PM Re: AR barrel threading question… [Re: RustyCJ8]
RustyCJ8 Seasoned Member Registered: 06/03/08 Posts: 361 Loc: Iowa	Thanks for the replies fellas. I haven’t heard back yet from the threader yet but I think I am going to send it in without the BCG. Thanks again, Dave _________________________ Not all those who wander are lost. J. R. R. Tolkien
Top

#3284087 - 10/25/21 09:51 AM Re: AR barrel threading question… [Re: Tonester]
Plant.One Die Hard Member with a vengeance Registered: 02/12/15 Posts: 4996 Loc: Oakland County, MI	Originally Posted By: Tonester Send the barrel in by itself. TC ^^ this. the smith i use charges a disassembly fee if you send in a full upper and not just the barrel. cant say i blame them either. with some basic tools, pulling an AR barrel takes less than 10 mins. _________________________ All reloading info shared is based on my experiences in my guns. Follow safe reloading practice and work up loads from published minimum data. This disclaimer will self destruct in 10 seconds.
Top

Hop to:

Moderator: Kino M, SnowmanMo