Well, I've been making a few changes to my CS24. Thought I'd post up a couple of pics for ya. Originally I added a 3/8" bolt through the hanlde and attached a coupling nut underneath it, I use a 3/8" SS rod screwed into for s stake. I wanted it off the ground a little bit for better sound and out of the mud and water. Next I welded a 1/4" coupling nut to the side of the handle, using a piece of 1/4" all-thread I attach my new BlackJack here. I use coupling nuts on the all-thread for jamnuts, also I can use them to connect pieces if I want the decoy higher. I have a few different lengths of it. All of these pieces got Krylon'd along with BJ box. Last I added some CamoForm around the handle and horn to quiet them down a bit and also so they aren't so cold to carry. Need to camo the curly cord and battery holder and I should be done. Here are the pics:
