Olympic Arms AR trigger SUCKS!!!!! Help me pick a new one!

I like the JP Enterprises triggers

http://www.jprifles.com/1.4.8.2_fc.php

I also like the RRA 2 stage

http://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_id=294


I would say the RRAs were my favorite for a long time and I still like them, but slowly the JPs have been taking over in my safe.

You can get them different places I just put those up for you to see them.

Lots to choose from and maybe you can find someone local that will let you feel a few to help you decide. A lot depends on the intended use also. I like both of the above to cover multiple uses. I get the JPs in the Duty set up but many folks prefer the standard set up.

These two are similarly priced with the RRA costing slightly less.
 
Originally Posted By: Mxracer532K, AR guys whats the trigger to put in them and what does it cost? Where is the best place to buy?

Easiest question of the day to answer: Giesselle (sp)

Just pick the config you want, and order away. They have about 10 or so configs, and the prices vary with the config.

I've been running the DMR for about 5 years, and NEVER had one single problem, with LOTS of hard use. Preceding the DMR I had a RRA Nat'l Match trigger, and absolutely hated it. Money wasted as far as I was concerned, so ordered the DMR, and couldn't be happier.

Here is ONE URL where you can get it.
http://geissele.com/

Buy once and forget it. No need for experimentation with different triggers here !!!!

Hangtime
 
I picked up an older Chip McCormick from a member here for one of my ARs and have been very happy with it...

Take out the original, drop in the CM, install the two anti-walk pins that come with it and no adjustment or malfunction to worry about..

I've tried the JP (critical on adjustment at install), have a RRA in another, and the CM is just simpler..
 
i ordered a Oly w a two stage trigger a while back.

Well, i had problems, called oly. They told me to send it to RRA for adjustments. It was an RRA two stage in an oly.

Drop a wilson combat trigger, love it
 
I just put in a Wolff Spring kit in my PSA and am very happy with it. 3# pull. I would like a 2# but from what I am reading, that's a no-go.
 
Originally Posted By: GSPKurtI just put in a Wolff Spring kit in my PSA and am very happy with it. 3# pull. I would like a 2# but from what I am reading, that's a no-go.

Was this a standard AR single stage trigger you put the Wolff springs in? And you had a 3 pound pull afterwards?
 
I have a RRA NM, and older Bushy NM and a Bill Springfield tuned. All are nice. I just recently handled a JP trigger with low mass hammer. It is nicer then any trigger I have in an AR.
 
Last edited:
Back
Top