|
|
|
Reloading & Ammo
|
|
C&H made a adaptor for the Herters presses to use standard shell holders, I have one on my Lyman TruLine Jr press that I use for trimming now..the Lyman used to be my go-to for reloading the bugs(Hornet and Bee), I bought a 7/8x14 head for it to
|
|
Firearms
|
|
Those loads marked "target" aren't match bullets that are designed for accuracy. They are full metal case/jacketed bullets for plinking and shooting at targets - not for game/varmints/self defense like a hollowpoint or softpoint bullet. I
|
|
Firearms
|
|
Shot the rifle again today. At 50 yds, the "Target" bullets and the HP's shot about the same. Both shot a decent size group. When I went to 100yds, the "Target" bullets accuracy fell apart in my opinion and the HP's shot much much
|
|
Reloading & Ammo
|
|
Quote:If your getting case head separations, it isn't the brass it's your prepping technique. Brass won't separate if it fits the chamber. All manner of maladies can beset brass but case head separation isn't one of them if it fits the chamber. If lo
|
|
Second Amendment Forum
|
|
As Fox's Tyrus just said, "It's as he thinks his dad is president." Hunter Biden arming himself with Second Amendment defense amid DOJ probe for illegal gun purchase: report Quote:Hunter Biden could soon find himself championing Secon
|
|
The Church of The Painful Truth
|
|
Sleep well tonight, your DHS is awake....oh wait.....are they??? U.S. Put Migrant Gangbanger w/MS-13 Tattoos in Foster Home after Raping, Killing Woman THE MURDER OF KAYLA HAMILTON: A CASE FOR IMMIGRATION ENFORCEMENT AND BORDER SECURITY Or
|
|
Firearms
|
|
Not to hijack a post, but years age I built a carbon/kevlar stock for a cz527. I did a casting of a the stock and hand laid pieces of carbon/kevlar cloth in resin. The final stock weighed 28 oz. Here it is.
|
|
Custom Hunting Accessories For Sale
|
|
They look great, looking forward to getting them. I appreciate you knocking them out for me. Tracking says they will be here tomorrow. After I show mine to a couple guys I may need to order some more. I'll let you know on that.
|
|
Firearms
|
|
Originally Posted By: WyoBullI have had a Heckler & Koch Model 300 in 22 WMR since 1979 and it is one of my prized rifles and calibers in my safe. I used to use it years ago when doing a lot of close in calling and it would flat hammer the red fo
|
|
Big Game Hunting
|
|
I don't dislike snakes and will let all non-venomous snakes pass and sometimes even venomous types unless they are near the house or someplace where the wife or grandkids might get bitten.
|
|
Predator Hunting
|
|
Originally Posted By: doggin coyotesWhat did the coyote grab on the ground just before it died? I'm not sure, after the dogs came in i didn't think to look
|
|
Firearms
|
|
Sorry for late reply. Standard Accu-Trigger. Also I just sent the rifle back to Savage as the bore looks like a D4 Cat drove down it. Coppers up bad and fast, took forever to go the Copper out. They said about 5-8 weeks turn around time.
|
|
Custom Calls For Sale
|
|
Congrats! Can't wait to see them in action later this year. A thousand bucks is nothing to sneeze at, even in today's market.
|
|
Reloading & Ammo
|
|
I shoot lots of wildcats that would have shoulder setbackband I can't use a standard die/holder interface. Some bumo shoulders back 10-20 thousands. I use a bench grinder to pull 0.010 tp 0.020 off the top. I don't care if it's perfectly even as it
|
|
Member Club House
|
|
Clandestyne - I'm Going Underground https://www.youtube.com/watch?v=dyHNAzOzxLk
|
|
Predator Hunting
|
|
Night hunting has been a game changer here in Oklahoma. Nothing is used to being called at night and the action can get wild in a hurry. I’m having a blast.
|
|
Reloading & Ammo
|
|
Originally Posted By: AWSIf your getting case head separations, it isn't the brass it's your prepping technique. Brass won't separate if it fits the chamber. All manner of maladies can beset brass but case head separation isn't one of them if it fi
|
|
Big Game Hunting
|
|
Rattlers and coral snakes are only poisonous snakes in the area, we don't have timber rattlers, copperheads or mocasins fortunately. This is a picture of a good Indigo on the wall in our camp kitchen (don't know who took it). I'm not a fan of snakes
|
|
Reloading & Ammo
|
|
Sometimes when installing a factory chambered shouldered barrel on a rifle that it wasn't originally on such as my Rem 722 with a Rem 700 barrel the head space can come up a little short. Factory ammo will chamber snugly but standard reloads will be
|
|
Night Calling
|
|
Nice shooting!
|
|
Custom Calls For Sale
|
|
Call showed up today. It looks and sounds great. It will be a few months before I start hunting again to try it.
|
|
Reloading & Ammo
|
|
The holders must not be heat treated (mild steel) if you can use emery paper. alf, I understand that, but "good enough" is not something that my OCD can handle...LOL Greg, Do you hand sand, dremmel, use a belt sander or file and then
|
|
Reloading & Ammo
|
|
Double tap. Greg
|
|
Reloading & Ammo
|
|
I grind the tops off all my shell holders. It works well for me and I'm not stressing the press to boot. Greg
|
|
Reloading & Ammo
|
|
Grinding shell holders for headspace is a new one on me..... Generally, the reason to shorten a shell holder is due to a long chamber and/or die, which means the die bottoms out the top of the shell holder before the shoulder can be bumped back far
|
