Originally Posted By: pyscodog
I get shoulder dents once in a while to. If and when I do, I take my die apart and give it a good cleaning. To much lube or a tiny piece of gunk can cause a nice dent in a shoulder as well. I use One Shot spay for most of my cases. Usually don't have much trouble.

Right there! Except I use the Hornady Unique in a tub for lube.

Also make sure the vent hole (if your die has one) is clear. That is in the area of the shoulder so it surfaces outside the die in the threads. It’s small and a fine piece of wire will be needed to clear it. It might be under the lock ring if you have trouble finding it.

Best regards

Three 44s

Edited by Three 44s (01/29/22 06:03 PM)