Predator Masters using UBB.threads ô Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Topic Options
#3258695 - 11/28/20 07:53 AM Superformance or CFE and 6creed coyote loads.
reaper4 Offline
Die Hard Member II

Registered: 02/25/14
Posts: 1951
Loc: maryland eastern shore
Just wondering if anyone here has used superformance or cfe with 70 grain loads in the 6mm creed? Canít find any varget anywhere and have a lead on superformance. Not much data out there. Any info would be appreciated. Iím looking to push a 70 hard out of a gasser.
_________________________
Jeremy

Top
#3258705 - 11/28/20 09:49 AM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
jetman Offline
Die Hard Member II

Registered: 01/07/11
Posts: 1466
Loc: almost Canada
Sorry can't help. I do use superformance in my 6mm rem
With a 55gr BT Nosler and get 4200 fps and dime-size groups in paper at 200 yards. There not a fur friendly bullet/load on a coyote if you hit any kind of bone.
_________________________
Coyotes-R-Us
It's all good all the time

Top
#3258717 - 11/28/20 01:12 PM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
reaper4 Offline
Die Hard Member II

Registered: 02/25/14
Posts: 1951
Loc: maryland eastern shore
Hey thanks for the input. I will be trying some out either way
_________________________
Jeremy

Top
#3258727 - 11/28/20 02:18 PM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
B23 Offline
Die Hard Member III

Registered: 12/07/11
Posts: 2310
Loc: Pacific NW
Midsouth Shooters Supply had Varget in stock yesterday morning but by the time I put it in my cart and got to the checkout portion of my order it had all been snatched up and my order was no longer available for purchase. Didn't do a whole lot of good but I spent the next five minutes saying a lot of bad words at my computer screen after that. mad

Can't help you with CFE or Superformance but I'm using 44gr RL16 with 70gr Nosler Ballistic Tips 10 thou off touch in my 6mm CM and it puts them it one ragged hole.

Top
#3258739 - 11/28/20 03:41 PM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
reaper4 Offline
Die Hard Member II

Registered: 02/25/14
Posts: 1951
Loc: maryland eastern shore
Thanks! I think I have 1/2 lb of 16 Iíll play with
_________________________
Jeremy

Top
#3258771 - 11/29/20 12:06 AM Re: Superformance or CFE and 6creed coyote loads. [Re: B23]
Zastava223rem Offline
Seasoned Member

Registered: 10/19/14
Posts: 325
Loc: Pennsylvania
Originally Posted By: B23
Midsouth Shooters Supply had Varget in stock yesterday morning but by the time I put it in my cart and got to the checkout portion of my order it had all been snatched up and my order was no longer available for purchase. Didn't do a whole lot of good but I spent the next five minutes saying a lot of bad words at my computer screen after that. mad

Can't help you with CFE or Superformance but I'm using 44gr RL16 with 70gr Nosler Ballistic Tips 10 thou off touch in my 6mm CM and it puts them it one ragged hole.


Check Powder Valley Frequently, works for me. What twist is you 6CREED? Got an 8.5 twist Bartlein being spun on to a Stiller TAC30 as we speak and was gonna try 87 gr VMAX and similar but I have probably 3k 70 gr Noslers too.


Edited by Zastava223rem (11/29/20 12:08 AM)
_________________________
Varmint Rifle Stable
-Sako 85S SS Varmint .22-250 Rem Vortex Gen II Viper PST 5-25x50
-Sako 85S SS Varmint .243 Win Leupold VX-3 8.5-25x50
-Mini Mauser Douglas 26" .223 Rem Leupold VX3i 6.5-20x50
-Sako A7 Coyote .223 Rem Leupold/VX3i 3.5-10x50 CDS

Top
#3258786 - 11/29/20 04:44 AM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
reaper4 Offline
Die Hard Member II

Registered: 02/25/14
Posts: 1951
Loc: maryland eastern shore
Mine is a 10 twist short throat. But I was running 70ís in a 7 twist rpr with great results before I git this gas gun.
_________________________
Jeremy

Top
#3258810 - 11/29/20 10:07 AM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
BrianID Offline
Seasoned Member

Registered: 12/03/18
Posts: 254
Loc: El Paso, TX/Idaho
I've used both superformance and CFE223 in my 6mm Creedmoors. CFE223 has given me higher velocities in lighter bullets in 6mm creedmoor. Powder manufactures and bullet manufactures have free information on their websites that isn't difficult to find. Hogdon's website has 42gr to 45.6gr of CFE 223 for 70gr SPR HP in 6mm creedmoor.

Top
#3258819 - 11/29/20 10:50 AM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
reaper4 Offline
Die Hard Member II

Registered: 02/25/14
Posts: 1951
Loc: maryland eastern shore
Tha is man I saw the CFE load on Hodgdon website. In the initial post I was looking at superformance but then added CFE to get some ideas if guys were liking it. It was poorly worded. Thanks for the input though. Iíll be trying CFE to see if I get any loads I like
_________________________
Jeremy

Top
#3258824 - 11/29/20 11:22 AM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
FairChase93 Offline
Die Hard Member II

Registered: 01/07/14
Posts: 1267
Loc: Western South Dakota
Its not directly related to your question but superformance is a highly underrated performer in the 6.5 case. Used it quite a bit in that application. It is in my experience temp sensitive. I get buy fine with my load which is a warm load in the fall and winter months but i dont shoot it when it starts to get into the late spring, summer, and early fall.

On the magneto speed my charge moves a 123 gr bullet right at 3000fps which is something i cant get out of other powders and its accurate. Standard deviation of 9 on 5 shot groups.
_________________________
"If his brains were black powder he couldn't blow his own nose"
-From Stephen King's The Shining

Top
#3258985 - 11/30/20 01:49 PM Re: Superformance or CFE and 6creed coyote loads. [Re: reaper4]
reaper4 Offline
Die Hard Member II

Registered: 02/25/14
Posts: 1951
Loc: maryland eastern shore
Thanks for the info. I have been looking for someone who runs it in a 6creed behind a 70 grain bullet but no luck
_________________________
Jeremy

Top
#3258988 - 11/30/20 02:18 PM Re: Superformance or CFE and 6creed coyote loads. [Re: Zastava223rem]
B23 Offline
Die Hard Member III

Registered: 12/07/11
Posts: 2310
Loc: Pacific NW
Originally Posted By: Zastava223rem
Originally Posted By: B23
Midsouth Shooters Supply had Varget in stock yesterday morning but by the time I put it in my cart and got to the checkout portion of my order it had all been snatched up and my order was no longer available for purchase. Didn't do a whole lot of good but I spent the next five minutes saying a lot of bad words at my computer screen after that. mad

Can't help you with CFE or Superformance but I'm using 44gr RL16 with 70gr Nosler Ballistic Tips 10 thou off touch in my 6mm CM and it puts them it one ragged hole.


What twist is your 6CREED?


My 6CM has a 20in Proof CF 9tw barrel.

Top



Moderator:  Matt1953 

© Predator Mastersô, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.