6x45 dies?

seasley

New member
Just ordered a 6x45 Dtech and was wanting to know what dies you all recommend?

I am considering Redding, but asking what dies you guys recommend
 
I use Hornady or Redding 223 sizers with the bushings. Be aware that not every Redding has a passage big enough for a 6 MM case neck.

Greg
 
Originally Posted By: seasleyWhere would I find these dies at?

I'd look at eBay, or Gun broker if none of the usual places have them.

Greg
 
Last edited:
I use a straight 6mm-223 from Hornady, it is the same as a 6x45. On the Redding bushing die if your handy and careful you can open the top of the die, it will get expensive if you screw it up though. I did that with a 204 Ruger Type S FL bushing die and load 22-204, 6mm-204 and 25-204. with it just swapping out expander balls, bushings and changing out the stem to handle the larger threads on the bigger expander balls.
 
Back
Top