Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Page 2 of 2 < 1 2
Topic Options
#3285945 - 11/21/21 09:59 AM Re: Need some advice on gun not grouping. [Re: rickyb]
Kino M Offline
Die Hard Member

Registered: 10/16/04
Posts: 778
Loc: Southern Indiana
Wow!! I'm surprised on so many levels but kudos to you on manning up to a MAJOR mistake on your part. Your not the only one who's had a moment as I know I have!

As for the damage to the can, who knows, there may be structural damage internally that you can't see but for someone to fire multiple rounds through a can like you did, I'd sure like to know what brand it is because its VERY WELL built!!! Lots of cans it only takes one baffle strike and ugly things happen!
_________________________
Been there, done that many times and have the DD214 to prove it....

Top
#3285980 - 11/21/21 04:36 PM Re: Need some advice on gun not grouping. [Re: Kino M]
crapshoot Offline
Retired PM Staff

Registered: 03/22/02
Posts: 22895
Loc: Henderson,Nevada,USA
Originally Posted By: Kino M
Wow!! I'm surprised on so many levels but kudos to you on manning up to a MAJOR mistake on your part. Your not the only one who's had a moment as I know I have!

As for the damage to the can, who knows, there may be structural damage internally that you can't see but for someone to fire multiple rounds through a can like you did, I'd sure like to know what brand it is because its VERY WELL built!!! Lots of cans it only takes one baffle strike and ugly things happen!


SAS giveaway was the qd mount TOMB
_________________________
I carry a gun because a cop is to heavy.

Average response time for a 911 call is 10 min.
Average response time for a .45acp is 900FPS.

Remember, if you're not pissing off a liberal......You are one!
Ted Nugent

Top
#3285989 - 11/21/21 06:56 PM Re: Need some advice on gun not grouping. [Re: rickyb]
Kino M Offline
Die Hard Member

Registered: 10/16/04
Posts: 778
Loc: Southern Indiana
Could be, whatever it is its solid!!
_________________________
Been there, done that many times and have the DD214 to prove it....

Top
#3286232 - 11/25/21 09:03 AM Re: Need some advice on gun not grouping. [Re: Kino M]
spotstalkshoot Offline
Die Hard Member III

Registered: 12/22/13
Posts: 2178
Loc: so.mn
So the "suppressor" place had the rifle and the wrong can for 10 months and said everything was fine? Only accuracy issue I have had with my direct thread(2), was using a thread(custom S.S.) adapter between muzzle thread and suppressor threads to save time moving can between two different size threaded barrels. Will not do that again.

Top
#3286296 - 11/25/21 05:08 PM Re: Need some advice on gun not grouping. [Re: rickyb]
BrianID Offline
Seasoned Member

Registered: 12/03/18
Posts: 392
Loc: El Paso, TX/Idaho
At least you figured out what the problem was. It is good you didn't get hurt. I was really confused why your groups opened up so much.

Top
Page 2 of 2 < 1 2



Moderator:  SnowmanMo 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.