Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Topic Options
#3283410 - 10/12/21 09:46 PM AR barrel threading question…
RustyCJ8 Offline
Seasoned Member

Registered: 06/03/08
Posts: 355
Loc: Iowa
A quick question for those who have had their AR barrel threaded. Did you send the upper in with or without the BCG? Thanks, Dave
_________________________
Not all those who wander are lost. J. R. R. Tolkien

Top
#3283414 - 10/12/21 10:07 PM Re: AR barrel threading question… [Re: RustyCJ8]
crapshoot Offline
Retired PM Staff

Registered: 03/22/02
Posts: 22898
Loc: Henderson,Nevada,USA
Doesn't matter.
_________________________
I carry a gun because a cop is to heavy.

Average response time for a 911 call is 10 min.
Average response time for a .45acp is 900FPS.

Remember, if you're not pissing off a liberal......You are one!
Ted Nugent

Top
#3283452 - 10/13/21 01:56 PM Re: AR barrel threading question… [Re: RustyCJ8]
SlickerThanSnot Offline
PM senior

Registered: 01/31/14
Posts: 5631
Loc: stuck in a fence
they don't need the bcg (if that is what you are wondering).. and they would probably prefer you didnt. for your sake and theirs if it was to get misplaced somewhere.
_________________________
skeptical is what i am when told there is a dead coyote in certain far off pictures.

Top
#3283631 - 10/16/21 11:45 AM Re: AR barrel threading question… [Re: RustyCJ8]
Tonester Offline
Seasoned Member

Registered: 04/20/13
Posts: 392
Loc: SE Nebraska
Send the barrel in by itself.

TC
_________________________
There is only one Lawgiver and Judge, the one who is able to save and destroy. But you--who are you to judge your neighbor?

James 4:12

Top
#3283657 - 10/16/21 07:31 PM Re: AR barrel threading question… [Re: RustyCJ8]
RustyCJ8 Offline
Seasoned Member

Registered: 06/03/08
Posts: 355
Loc: Iowa
Thanks for the replies fellas. I haven’t heard back yet from the threader yet but I think I am going to send it in without the BCG. Thanks again, Dave
_________________________
Not all those who wander are lost. J. R. R. Tolkien

Top
#3284087 - 10/25/21 09:51 AM Re: AR barrel threading question… [Re: Tonester]
Plant.One Offline
Die Hard Member with a vengeance

Registered: 02/12/15
Posts: 4718
Loc: Oakland County, MI
Originally Posted By: Tonester
Send the barrel in by itself.

TC


^^ this.

the smith i use charges a disassembly fee if you send in a full upper and not just the barrel.

cant say i blame them either.

with some basic tools, pulling an AR barrel takes less than 10 mins.
_________________________
All reloading info shared is based on my experiences in my guns. Follow safe reloading practice and work up loads from published minimum data.
This disclaimer will self destruct in 10 seconds.


Top



Moderator:  SnowmanMo 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.