Rustydust
Active member
Had a gunsmith thread the barrel on my CZ 527 .17 Hornet the other day. He asked to not have the scope on the gun when I brought it in. OK fine I just loosened the rings where they mount to the receiver and took the scope off. After I got it back I put the scope back on right where it was and tightened the rings back down. Next trip to the range the gun is now shooting WAY to the right and I ran out of adjustment trying to bring it back on center. I have taken scopes off many time and put them back on over the years but I am a bit stumped what might have happened here. Before I started messing with it I thought I may as well as you guys and see if any of you know what happened and what might be an easy fix.
Oh, and first thing I did was to check and make sure the rings were not cocked or anything. All looks fine.
Oh, and first thing I did was to check and make sure the rings were not cocked or anything. All looks fine.