Savage axis firing pin spring fix

Baby huey

New member
Finally got my light hit problem fixed on my savage. Tried the washer in spring cup still gave me fits. The drawing is what I came up with to fix spring bind caused by round wire spacer. It's a brass guide that also preloaded .060 more on the springs and guides off the firing pin. Tried more preload but found it binder on the guide pin
Good luck
Can't find where to post drawing or photos [img:center]http://https://flic.kr/p/2ks2pFG[/img]
 
Last edited:
I put the washer between the two springs and works good so far but would be interested in your picture if you could text it to me, thx
 
I had Savage Axis dreadful trigger until we polished it then the groups went down to 1" they were over three inch before the work....well only took about two hours.
 
Back
Top