I went back 35 pages and never found any info, not to suprising for a varmint or predator forum. I was curious if anyone on here loads for it. Thanks in advance
58.0 grains of Retumbo, FGMM210's Gunwerks Brass, 139 Scenars. My first loads were under 1/2 MOA so I just let it be, I could probably get her down to 1/4, but too lazy right now.
Unfortunately some of the best powders for the 6.5 PRC are also the most difficult to get so unless you already have a stash of RL26, H1000, or Retumbo you'll have to go with other powders. I think IMR8133 is supposed to work relatively well too.
The 6.5 PRC is quickly becoming a very popular cartridge and I'm sure if you google 6.5 PRC load data you'll get enough reading material to keep you busy for days testing.
I've been burning 57.2grains of VihtaVuori N565 behind a 143 ELDx for 3100FPS 1/2 MOA . Sweet expensive stuff . FED 210 Match primer 26" bbl and I have room for more,just don't see the need unnecessarily expand primer pockets in search of top velocities. My 257 WBY produces all the high velocity I need.
Originally Posted By: 509welderI have some reloader 25 and some us869 is the only thing I have on hand I was thinking the us869 would be to slow, I'll find out though.
US869 has the burn rate about equal to wet coal so if those are your only two options RL25 will be your huckleberry.
I have owned a couple, and done load development for a few others. Great cartridge, nice increase over a Creed or 260 without getting into the real overbore crowd. I like RL26, H1000, Retumbo, Magpro for loads in the 140-156gr range
Here’s a load a friend of mine swears by. I just ordered some 147s to try it out myself but It’s his pet load that has worked great in 3 rifles so far.
6.5 prc
Fed 215 primer specifically
53gr N560
147gr eld-m
2.965 oal
He didn’t specify brass so I’m not sure on that. I figured I have Hornady and adg, I’ll work up both and see