Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Topic Options
#3244306 - 05/13/20 11:54 AM LANE SUPPRESSORS???????
HOOVY Offline
Seasoned Member

Registered: 03/01/09
Posts: 181
Loc: Hot Springs VA

I see a lot of big name suppressors on here and a lot of talk about them. I have been researching and reading and I am not finding much info on the Lane stuff. I like the looks of the disassembly and one piece internals of their suppressor. ANY USERS HERE GOOD OR BAD ?????? THANKS 1st time buyer i want to do this once and once only smile smile HOOVY

Top
#3244324 - 05/13/20 02:42 PM Re: LANE SUPPRESSORS??????? [Re: HOOVY]
crapshoot Offline
Retired PM Staff

Registered: 03/22/02
Posts: 22253
Loc: Henderson,Nevada,USA
Originally Posted By: HOOVY

i want to do this once and once only smile smile HOOVY


mellow

Good luck with that. They are like lays potato chips.
_________________________
I carry a gun because a cop is to heavy.

Average response time for a 911 call is 10 min.
Average response time for a .45acp is 900FPS.

Remember, if you're not pissing off a liberal......You are one!
Ted Nugent

Top
#3244351 - 05/13/20 10:01 PM Re: LANE SUPPRESSORS??????? [Re: HOOVY]
MasterBlaster Offline
Die Hard Member II

Registered: 12/31/01
Posts: 1369
Loc: SE. Iowa
I have a Scorpion 6.5 works great so far. I just got it out of suppresser jail.
They are great to work with. They went above and beyond for me.

Top
#3244899 - 05/20/20 11:15 PM Re: LANE SUPPRESSORS??????? [Re: HOOVY]
KCGoatie Offline
New Member

Registered: 08/12/19
Posts: 16
Loc: MN
I’ve enjoyed a scorpion 556 on my 243. The price was right at the time. Disassembly isn’t as easy as a guy would hope and the SS version is pretty hefty. I did send it to them to be cleaned once as I couldn’t get it apart after a few hundred or maybe even a thousand rounds. It came back in about a week cleaned up which was really fast in my opinion. I was a little bummed they had marred up the one side with a wrench a bit and the mating surface had some strange marks that almost looked like pitting. I Duracoat stuff pretty regularly for fun so it wasn’t a huge deal to me. I could see someone with a slightly different personality getting upset.

I just got the shipping notice on my second can after over a year NFA wait and it is not a LANE silencer. Not because they’re bad but because variety is the spice of life.

Whatever suppressor you choose I would suggest you get the lightest that fits your use and buy NOW. I know too many ppl that want them but drag their feet and start researching right around the end of August when fall starts creeping in. Wait times are a bit weird but a guy could get lucky and get it before hunting season. [beeep], buy a Lane and something else!

Top
#3245094 - 05/24/20 09:17 AM Re: LANE SUPPRESSORS??????? [Re: HOOVY]
RedfootRanch Offline
Seasoned Member

Registered: 07/15/10
Posts: 426
Loc: Michigan
I run a couple of them on 6mm down to 20 cal. 6.5" long and 11 oz. Good stuff!

Top
#3245484 - 05/28/20 12:49 AM Re: LANE SUPPRESSORS??????? [Re: RedfootRanch]
KCGoatie Offline
New Member

Registered: 08/12/19
Posts: 16
Loc: MN
Must be full on Ti version of the 556 redfoot ?


Edited by KCGoatie (05/28/20 12:50 AM)

Top
#3245739 - 05/31/20 12:06 AM Re: LANE SUPPRESSORS??????? [Re: HOOVY]
ttedb3 Offline
Seasoned Member

Registered: 03/12/10
Posts: 327
Loc: Nebraska
I have two and they are good to go. So is Lanes service. They are made in SD which is a plus for me.
_________________________
"We must do what we must do. For if we don't do what we must do, then what we must do won't get done".....

Top



Moderator:  SnowmanMo 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.