Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Topic Options
#3238180 - 03/15/20 01:10 AM Favorite dye/dip method
Thumper3181 Offline
New Member

Registered: 07/18/18
Posts: 12
Loc: Kentucky
I tried the 50/50 acetone/ Rust-Oleum rusty metal, let hang for about 2 months, then dipped in FMJ and they hung an additional month. I an insane amount of dig outs, until I waxed them and that helped a bunch, but I am switching to something else this year. I might just go back to traditional dyeing and waxing.
Thanks


Edited by Thumper3181 (03/15/20 03:47 PM)

Top
#3238241 - 03/15/20 04:00 PM Re: Favorite dye/dip method [Re: Thumper3181]
AWS Offline
Moderator

Registered: 02/01/03
Posts: 5202
Loc: NM
I've always dyed mine in oak saw dust. I could get it by the bucket full at the local mill. I had a half of a 55 gal drum on blocks with a gas burner under it. I first cook them in lye to clean them , rinse and re-cook them with a bunch of oak sawdust in the barrel. Hang them on the barbwire fence to dry and dip in hot melted wax with a nail between the jaws. I did this in the spring after beaver season was over and boxed them in plastic flip top boxes and put them away until fall.
_________________________
After the first shot the rest are just noise.

Make mine a Minaska.

Heaven has rules and walls, He-l has open borders

Top
#3238243 - 03/15/20 04:22 PM Re: Favorite dye/dip method [Re: Thumper3181]
Thumper3181 Offline
New Member

Registered: 07/18/18
Posts: 12
Loc: Kentucky
That's what I used to do and I actually picked up a 5 gallon tote of Red Oak sawdust Friday. I also used to put my sawdust in pantyhose so that the dust wouldn't get stuck to the traps. BTW Walnut sawdust does an excellent job as well, but tends to be more of a dark brown.


Edited by Thumper3181 (03/15/20 04:23 PM)

Top
#3242152 - 04/18/20 07:28 PM Re: Favorite dye/dip method [Re: Thumper3181]
Tactical .20 Offline
Die Hard Member III

Registered: 02/13/03
Posts: 3703
Loc: Estherville,IA
I used to dye n wax, now I only wax
_________________________
member NTA,ITA

Top
#3242442 - 04/21/20 03:59 PM Re: Favorite dye/dip method [Re: Thumper3181]
22 Chuck Offline
Seasoned Member

Registered: 08/11/17
Posts: 151
Loc: Montmorency Co, MI
We like the 4 oz (or so) bottle of liq dye and they after trap is removed from dye ad dry-immerse in wax till trap is hot. Remove w/ a hook and let it drip to save most of the dripped wax.

Usually put a link of chain into the trap jaws. Dye only on conibears. We dont do snares.

Top
#3242880 - 04/26/20 08:27 PM Re: Favorite dye/dip method [Re: 22 Chuck]
spotstalkshoot Offline
Die Hard Member II

Registered: 12/22/13
Posts: 1714
Loc: so.mn
I dye conibear type traps. Canine foothold traps are dipped in fullmetal jacket. Water legholds are dyed. Since I really only trap canines during freeze/thaw conditions a bagged mb650 and waxed dirt/antifreeze dipped in full metal jacket resist rust and is very fast.

Top
#3243152 - 04/29/20 03:22 PM Re: Favorite dye/dip method [Re: Thumper3181]
Brad Phillips Offline
Die Hard Member II

Registered: 01/11/04
Posts: 1172
Loc: Gilbertville, IA
Spray paint bodygrips.
Speed dip water traps and dog proofs.
Wax canine stuff.
_________________________
"No free lunch internet answer can answer that" pahntr760

Top



Moderator:  AWS 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.