Christensen Arms

Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Topic Options
#3235149 - 02/22/20 05:50 PM H-S Precision Stock recoil pad
coal farmer Offline
Junior Member

Registered: 11/11/16
Posts: 41
Loc: South West INDIANA
Hey All,
Anybody here ever replace the recoil pad on a H-S Precision stock?
If so how did you get the old one off?
Thinking about trying to replace one with a softer one.
~ Thanks

Top
#3235476 - 02/23/20 11:01 PM Re: H-S Precision Stock recoil pad [Re: coal farmer]
arf Offline
New Member

Registered: 12/17/11
Posts: 6
Loc: Oklahoma
I cut it off with a knife. But I had a HS stock that was too short and I only cut off the rubber portion of the recoil pad leaving the hard plastic base plate. Then I epoxied my new pad to the old base. This gave me the added length of pull I needed. Good luck. I do know HS refused to sell me a replacement pad.

Top
#3235551 - 02/24/20 11:54 AM Re: H-S Precision Stock recoil pad [Re: coal farmer]
pyscodog Offline
PM Junkie

Registered: 12/04/06
Posts: 14248
Loc: okla
Years ago I sent a stock back to H-S for repair on stripped out sling stud. They repair it at no charge to me. You might contact them and ask about replacing the pad. Nothing ventured, nothing gained.
_________________________


Stay away from negative people, they have a problem for every solution.

Top
#3235629 - 02/24/20 07:29 PM Re: H-S Precision Stock recoil pad [Re: coal farmer]
coal farmer Offline
Junior Member

Registered: 11/11/16
Posts: 41
Loc: South West INDIANA
H-S Precision wants $175 to replace butt pad and $25 for return shipping.
That's why I was inquiring about how difficult a job this might be
Before jumping in and doing it myself.

Top
#3235632 - 02/24/20 07:46 PM Re: H-S Precision Stock recoil pad [Re: coal farmer]
pyscodog Offline
PM Junkie

Registered: 12/04/06
Posts: 14248
Loc: okla
WOW! Thats a bunch.
_________________________


Stay away from negative people, they have a problem for every solution.

Top
#3235673 - 02/24/20 10:46 PM Re: H-S Precision Stock recoil pad [Re: pyscodog]
parson Online
Seasoned Member

Registered: 11/16/13
Posts: 470
Loc: North Dakota
No idea how they secure their pads but I have taken a number of glued on pads off by using heat from a hot air gun to soften the adhesive then cleaned up with utility knife and sanding block

Top
#3235793 - 02/25/20 05:59 PM Re: H-S Precision Stock recoil pad [Re: coal farmer]
Al Hansen Offline
Predator Master

Registered: 11/27/17
Posts: 66
Loc: Utah
Originally Posted By: coal farmer
H-S Precision wants $175 to replace butt pad and $25 for return shipping.
That's why I was inquiring about how difficult a job this might be
Before jumping in and doing it myself.


OUCH !!!
_________________________
GOD Bless America

Top
#3235802 - 02/25/20 06:42 PM Re: H-S Precision Stock recoil pad [Re: coal farmer]
pyscodog Offline
PM Junkie

Registered: 12/04/06
Posts: 14248
Loc: okla
I would think a good smith could replace it for a lot less than that.
_________________________


Stay away from negative people, they have a problem for every solution.

Top



Moderator:  Infidel 762 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.