First shot from clean bbl?

M

Mark308lr

New member
On the PAC-NOR website under Bbl break-in and cleaning techniques,they recommend "Never shoot a dry bore as this will greatly promote copper fouling".
This is the first I've read this. Makes sense [beeep]. I've always run a few dry patches thru the bore to get the oil out before the first shot after cleaning or storage.
Any thoughts on this?
 
Lock Eze is used often for this. At least until the bbl is fire lapped. Too much of anything can raise pressures to a dangerous level...so a minuscule amount should be applied.
 
Back
Top