243/75 gr Vmax Data?

[Rusty Black]

Im looking for some data to load a 75 gr vmax for my 243,I got a few reloading books but nothing on the vmax..I can use H414 or cfe 223 powder...pm me and let me know if you can help...Thankyou Rusty

 

[pahntr760]

Use any other 75 grain data. Load books are simply guides and are not set in stone. The manufacture.model of the bullets doesn't matter with cup and core bullets. It is a slightly bigger consideration with monos, however if one is in the least bit prudent in their loading practices it is a non issue.

 

[Rusty Black]

Ok thanks bud...that's what,I thought..

 

[Zerk]

I am pretty sure Hornady has it in their book. I may have some waiting for spring to try out. Can't remember. Hornady's seating depths vary from Lymanns, so best to use the powder load from the book you got it from.

I didn't noticing this and loaded a few up above max grain for that manual.

 

[gary paugh]

I would go with H-4350 or imr-4831.

 

[Zerk]

75grn vmax in Hornady's 9th, but not those powders.

 

[Lorne]

im using a 75 grain vmax in my 243 with varget and a charge of 37.5 grains of varget and very accurate at a 100 yards .25 Moa at a 100 and about .75 at 200

 

[Zerk]

Glad to see people don't have bugs up their butt about reloading here, and if you share data children will die.

 

[Bob Tobergte]

'Reloadersnest'.

 

[ackleyman]

44.5g-45.0g of H414 with a fed 210 primer

Here is a site where reloaders share their loads, always check against a reloading manual

http://centerfirecentral.com/MDB/Categor...bmit=Search+Now

 

[Jay Cummings]

I had good luck with RL15 at around 38-38.5gr with the 75gr vmax. Accurate 4064 was really good also at 38-39gr. Loads were safe in my gun.

 

[Bob_Atl]

Hornady manual treats 75 HP and VMAX the same, so from Hodgdon www:
I've tried these 4 and ended up with 4166 fwiw..

Have not tried these, same www site:

 

[Lipan Creep]

Varget and IMR4850 should work well
So should RL-15