Looking for load data for the 6X6.8

I'm shooting 65g vmax 30.5 8208 cci 450 or Remington 7 1/2 primers 2.290 that was my load wasn't hot but I would start lower in your rifle too shot under 1/2" at 100 yards. I think the stand by load for the 58g vmax is 31-31.5 g of 8208 cci450 or Remington 7 1/2 primers. When you work your loads up I would go up 2 tenths at a time and watch for swipe marks and pressure signs. Depends on what you are using this for more information and I'll give you more bullet ideas.
 
Looking for coyote loads so 55gr to 75 gr. looks like 5spd likes the 65 Vmax. I have a large selection of bullets and powder also what brass is working the best or where can you find it for sale.
Thanks
MB
 
Originally Posted By: kswaterfowlAnyone have a good 55 gr nosler load?
31.5 8208xbr or 33.0 H335 are the go to loads for 55 NBT.
 
Originally Posted By: DiRTY DOGOriginally Posted By: kswaterfowlAnyone have a good 55 gr nosler load?
31.5 8208xbr or 33.0 H335 are the go to loads for 55 NBT.

Awesome! Thank you very much.
 
Originally Posted By: Bob_AtlMine likes the 87 Vmax over 29.0 gr of 8208 XBR.
Also likes the 75 Vmax over 29.4 gr of 8208 XBR.

Any idea how fast the 87 vmax was going? And what length barrel you have? I have a new 22" upper I just got with 1300 87grain vmax bullets. Hoping this barrel likes that bullet.
 
In my 24" I am getting 3041 with 29 grains 8208 and and 87 Hornady so about 3000. Extrapolating my 85 grain loads with 8208 to a 75 I would expect to see right on 3100-3150 out of the 75's.

These loads do not hammer the cases and you will get excellent life.

My 87 grain load I use at 500 is 30.2 of RL15 at 3071. TAC at 29.5 gave me the same velocities with excellent groups.

These are from a BHW polygon barrel. Of note 5SPD's numbers DO NOT APPLY!! he shoots standard Enfield rifled barrels NOT poly.

Greg
 
Originally Posted By: kswaterfowlAnyone have a good 55 gr nosler load?
32g h335, 55g varmageddon or NBT = 3590 fps in my 22" BHW 1/9" tw bbl. (bolt build)
 
Originally Posted By: Willy BrotzOriginally Posted By: Bob_AtlMine likes the 87 Vmax over 29.0 gr of 8208 XBR.
Also likes the 75 Vmax over 29.4 gr of 8208 XBR.

Any idea how fast the 87 vmax was going? And what length barrel you have? I have a new 22" upper I just got with 1300 87grain vmax bullets. Hoping this barrel likes that bullet.
20" BHW.
BR-4 primers. CCI-450s may do a bit more.
87 => 2981 fps
75 => 3147 fps
 
Back
Top