70 gr nosler powder choice for 243 win

Thanks for bringing this up. I meant to add that is was a hot load. It was showing some pressure and also between 90 to 100 degrees that day.
 
Originally Posted By: sbranden46 to 47 grains of IMR-4350 with WLR primers for the 70NBT's (seated long) out of a 243win.
46.5 is where I ended up, although I shot all the way up to something like 47.2.
This is a hot load though so work up slowly in your gun.
At 46.5 seated .005 off in Lapua brass, I'm running 70's now at 3,385fps out of my Tikka T3 Lite.

I also had real good luck first with a full case of Reloder 19 and the 70NBT (seated short).
Speed was down around 3,250 though. I still use this formula for another buddy however.
I can give you specifics on this one also at any time. Just know that you can make them work and work well with either one of these two powders.

this seems to be a standard load for many 243's.

I shot a slower load for years on p. dog towns of 44.5g of Win 760 with a Fed 210 primer, and it shoots bug holes.

For best accuracy, the 70g nosler has shot the best touching the lands.
 
Back
Top