Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Page 13 of 18 < 1 2 ... 11 12 13 14 15 17 18 >
Topic Options
#2861914 - 09/16/15 02:23 PM Re: 6x45 Load data [Re: pcammo]
Yoda-X Offline
Seasoned Member

Registered: 11/08/14
Posts: 105
Loc: Western US
I just built my first 6x45 and have about 100 rounds loaded with 85gr Barnes TSX. Working on some loads now for Vmax's, and some Nosler BT. Primary powder so far has been 8208.

Top
#2862040 - 09/16/15 08:31 PM Re: 6x45 Load data [Re: pcammo]
RobUSMC Offline
New Member

Registered: 07/20/15
Posts: 18
Loc: NC
Cliff
I just got some new glass for it and reloaded 95gr Nosler Ballistic tip that didn't do so great in my rifle. Best group was around 1 inch. I ordered another box of 87gr V-Max and as well a box of 75gr V-Max. Worked up some test loads this week with IMR 4895, 8208, and 3031. Ill be heading to New York for work for three weeks, but will be all over it once I get back. Ill post the results once I get them down range.
Sorry Bro, works has got me stepping and fetching. Life of a Marine EOD Tech!

Rob

Top
#2866843 - 10/02/15 12:20 AM Re: 6x45 Load data [Re: pcammo]
Deadeye260 Offline
Predator Master

Registered: 11/24/14
Posts: 51
Loc: Texas
Hi Is this list of loads avaliable for email?
I would like to browse thru it..
I put together a 6×45 AR with a AR Stoner 5r barrel from Midway and it's a shooter! I have been running 87gr bthps it groups 5 into around a 1/2" or less @100yrds! I have also ran some 100gr btsp thru it with a modified mag but I haven't tested those for accuracy yet. I am mainly interested in finding a good load for the 80gr ttsx with XBR OR W748.
_________________________
#moonsoutgoonsout

Top
#2866893 - 10/02/15 08:45 AM Re: 6x45 Load data [Re: pcammo]
eneranch Offline
Seasoned Member

Registered: 06/01/09
Posts: 249
Loc: Colorado Springs, CO USA
Hope this link works

6x45 Load Data PDF

Top
#2867960 - 10/05/15 05:15 PM Re: 6x45 Load data [Re: eneranch]
Deadeye260 Offline
Predator Master

Registered: 11/24/14
Posts: 51
Loc: Texas
Originally Posted By: eneranch
Hope this link works

6x45 Load Data PDF


Thank You eneranch!
_________________________
#moonsoutgoonsout

Top
#2869105 - 10/08/15 05:55 PM Re: 6x45 Load data [Re: RobUSMC]
cb4017 Offline
New Member

Registered: 08/02/15
Posts: 15
Loc: Nevada
Originally Posted By: RobUSMC
Cliff
I just got some new glass for it and reloaded 95gr Nosler Ballistic tip that didn't do so great in my rifle. Best group was around 1 inch. I ordered another box of 87gr V-Max and as well a box of 75gr V-Max. Worked up some test loads this week with IMR 4895, 8208, and 3031. Ill be heading to New York for work for three weeks, but will be all over it once I get back. Ill post the results once I get them down range.
Sorry Bro, works has got me stepping and fetching. Life of a Marine EOD Tech!

Rob



Rob, did you get a chance to work your loads yet? I'd be very interested in your results. I have 8208 on hand and 4895 is available locally. BTW, Thanks for what you do. I have much respect for your job.

Cliff
_________________________
Cliff
USN Ret. FPD Ret.

Never underestimate the power of stupid people in large groups.

Top
#2869142 - 10/08/15 07:34 PM Re: 6x45 Load data [Re: pcammo]
Inxslung12 Offline
Predator Master

Registered: 11/24/13
Posts: 99
Loc: Southern CA
My go to is imr 4895
18" krieger Remington 700 action.
80 grain Bergers with 24.5 grains of 4895
2609 fps
.5 moa. Shoots better than my skills are capable of.

Top
#2875834 - 10/27/15 09:25 PM Re: 6x45 Load data [Re: eneranch]
crowdog7 Offline
New Member

Registered: 10/25/15
Posts: 6
Loc: Northern Colorado
Thank you eneranch!
That's an impressive amount of load data.


Edited by crowdog7 (10/27/15 09:26 PM)

Top
#2879133 - 11/05/15 05:40 PM Re: 6x45 Load data [Re: pcammo]
velvetant Offline
Junior Member

Registered: 09/24/15
Posts: 34
Loc: Northern Nevada
24gr H322/Nosler 70gr Varmageddon from my new 22" DTech upper, just under .5" for 5 rounds and 9 out of 10 rounds into a single ragged hole.
Going to see if the coyotes cooperate this Saturday.

Top
#2882306 - 11/13/15 05:08 AM Re: 6x45 Load data [Re: pcammo]
Aiden12 Offline
New Member

Registered: 11/12/15
Posts: 3
Loc: punjab,india
I see very little data using the AA 2230 powder. Is there a particular reason for that or no one simply has played with powder much? Any opinions on this powder? I use it for my 233 rifles.

Top
#2882346 - 11/13/15 08:59 AM Re: 6x45 Load data [Re: Aiden12]
GLShooter Offline
PM Sponsor

Registered: 01/09/05
Posts: 5326
Loc: AZ
Originally Posted By: Aiden12
I see very little data using the AA 2230 powder. Is there a particular reason for that or no one simply has played with powder much? Any opinions on this powder? I use it for my 233 rifles.


Actually there is quite a bit of it. Accurate lists it on their web site. Also AA2230 and X-TERMINATOR are the same powder.

It works well in mine.

Greg
_________________________

Top
#2888121 - 11/27/15 12:00 PM Re: 6x45 Load data [Re: eneranch]
endmange Offline
New Member

Registered: 06/07/12
Posts: 5
Loc: ne NE
Would you be able to help me out with the 6x45 load data too. Every time I try it sends me to the Buck ammo page as well. Thank you.

Top
#2888250 - 11/27/15 06:59 PM Re: 6x45 Load data [Re: endmange]
GLShooter Offline
PM Sponsor

Registered: 01/09/05
Posts: 5326
Loc: AZ
Originally Posted By: endmange
Would you be able to help me out with the 6x45 load data too. Every time I try it sends me to the Buck ammo page as well. Thank you.


PM sent.

Greg
_________________________

Top
#2888255 - 11/27/15 07:13 PM Re: 6x45 Load data [Re: pcammo]
venatic Offline
Retired Moderator

Registered: 06/11/03
Posts: 6992
Loc: In the right lane
I mainly use XTerminator in my Bolt gun 6x45 and it is the same as AA2230 as GL noted and there is plenty of data out there.

In My AR I am using N530 right now with the 75-80 gr bullets
_________________________
"Anyone taking up handloading necessarily plays with unknown factors and takes chances. But so does anyone who drives a car,goes to a cocktail party,eats in a restaurant,or gets married."

Jack O'Connor 1963


Top
#2888933 - 11/29/15 04:04 PM Re: 6x45 Load data [Re: venatic]
GLShooter Offline
PM Sponsor

Registered: 01/09/05
Posts: 5326
Loc: AZ
Here's a current file on the 6X45 load dsta:

https://drive.google.com/file/d/0Bzuroq2iOSD7S2JDRFFYMFQtRTg/view?pli=1



Greg
_________________________

Top
Page 13 of 18 < 1 2 ... 11 12 13 14 15 17 18 >



Moderator:  Matt1953 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.