moonshine44
Active member
Fired three rounds of factory Hornady 123 grainers for function testing the new Grendel (still waiting on the scope. Should be here next week). The empty brass landed out in front of me about 5 or 6 feet at about the two o'clock position (barrel considered twelve o'clock). Each case had a tiny perpendicular dent about halfway up the side of the lower part (below the shoulder), I'm assuming from the case deflector on the upper. From stuff I've read on here I believe that it's a bit overgassed, but at this point it doesn't seem to be causing issues. I do have an adjustable gas block installed and will probably be playing with that in the future, but for now it goes bang when it's supposed to and it ejects the empties and feeds loaded rounds, so I'm a happy camper!