Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Page 12 of 18 < 1 2 ... 10 11 12 13 14 ... 17 18 >
Topic Options
#2768080 - 12/30/14 07:33 PM Re: 6x45 Load data [Re: eneranch]
topweldor1 Offline
Seasoned Member

Registered: 11/07/12
Posts: 363
Loc: az, usa
Sent pm , Thanks

Top
#2774950 - 01/09/15 12:17 AM Re: 6x45 Load data [Re: topweldor1]
IAyoteHNTR Offline
Die Hard Member II

Registered: 12/23/05
Posts: 1778
Loc: SE IOWA
A quick piece of ^X45 load data to share.

6X45 20" BHW barreled AR-15
Winchester brass trimmed to 1.755"
WSR primer
27.2 grains of H335 powder
58 grain 6MM Hornady V-Max
Overall Cartridge Length 2.230"
Average chrono speed 3095 fps
Average 100 yard 5 shot groups .850"

This is my go to coyote load zeroed @ 200 yards, 1" high @ 100 yards.
_________________________
Family Man, Veteran, Independent, Atheist

I love my family and my country. Family is ALWAYS first!

BIG 2nd amendment fan, even BIGGER 1st amendment fan!

Top
#2780541 - 01/17/15 05:49 PM Re: 6x45 Load data [Re: pcammo]
topweldor1 Offline
Seasoned Member

Registered: 11/07/12
Posts: 363
Loc: az, usa
I will have to try it . H335 is scarce a hens teeth out here.

Top
#2796554 - 02/12/15 10:24 AM Re: 6x45 Load data [Re: pcammo]
Fencepost Offline
New Member

Registered: 12/07/14
Posts: 22
Loc: NE, Wisconsin
Has anyone explored IMR4227 as a powder for the 6x45? I used to load .222 with it and was wondering if it would be suitable for 55 gr bullets.

Top
#2796774 - 02/12/15 05:41 PM Re: 6x45 Load data [Re: pcammo]
eneranch Offline
Seasoned Member

Registered: 06/01/09
Posts: 249
Loc: Colorado Springs, CO USA
I think IMR4227 is too fast; I've shot IMR4198 with good results

Top
#2797076 - 02/13/15 06:37 AM Re: 6x45 Load data [Re: eneranch]
Fencepost Offline
New Member

Registered: 12/07/14
Posts: 22
Loc: NE, Wisconsin
Thanks for the reply.

Top
#2847950 - 07/23/15 04:20 PM Re: 6x45 Load data [Re: pcammo]
RobUSMC Offline
New Member

Registered: 07/20/15
Posts: 18
Loc: NC
Hey guys! I know this is an old post, however I found it while doing some research of my own on the 6x45 I'm starting to build.
I also am working on a 17x223! That's the reason for the post.
Does anyone out there have the low down on forming the brass for the 17x223? I have found nothing on line and have no idea where to look next.
I figure that it is similar to forming the 6x45, but I'd like to hear it from some guys who have one.

Thanks for any and all help!!!
RobUSMC

Top
#2847982 - 07/23/15 07:17 PM Re: 6x45 Load data [Re: pcammo]
3DHUSKER Offline
Die Hard Member II

Registered: 12/12/10
Posts: 1724
Loc: DownTheRoadFromKampKumbaya
RobUSMC

What is wrong with the info from your first thread?

http://www.predatormastersforums.com/for...826#Post2847826
_________________________
Life is too short to shoot crap cans.
“Once you start down the dark path, forever will it dominate your destiny, consume you it will.” Master Yoda
I got everything I need and nothing that I don’t

Top
#2850276 - 08/02/15 12:10 PM Re: 6x45 Load data [Re: pcammo]
cb4017 Offline
New Member

Registered: 08/02/15
Posts: 15
Loc: Nevada
Morning Gents. I've been lurking for awhile. I've got a couple of questions on the 6x45 and figured this was the place to ask.

Has anyone worked up some loads with AR-Comp? It's one of the few powders available locally and seems like it would be usable in 6x45.

Any working links or way to obtain the latest version of the 6x45 load date pdf?

Thanks!
Cliff
_________________________
Cliff
USN Ret. FPD Ret.

Never underestimate the power of stupid people in large groups.

Top
#2855218 - 08/22/15 06:13 PM Re: 6x45 Load data [Re: cb4017]
RobUSMC Offline
New Member

Registered: 07/20/15
Posts: 18
Loc: NC
Cliff,
I don't have anything in the way of AR Comp, however I'll be testing some IMR tomorrow if that would help? Ill post it here when I get the results back! Wont help with the AR Comp but might give you some other options.

Rob

Top
#2855485 - 08/23/15 08:34 PM Re: 6x45 Load data [Re: RobUSMC]
RobUSMC Offline
New Member

Registered: 07/20/15
Posts: 18
Loc: NC
Cliff
Sorry, but my day at the range did not turn out as planned. We did go, but shortly after the 50yd (see if your on paper test) life went bad. After moving to the 100yd line, I found that the rifle would not group at all. We are talking 6" to 8" groups! Not 100% on what the problem is, however I feel that it is a glass issue. I through another scope on it and will do a take 2 next weekend. I hope to have that data posted after that! Everything else about the rifle was great, except I just cant hit crap! Haha story of my life.
Rob

Top
#2855486 - 08/23/15 08:37 PM Re: 6x45 Load data [Re: 3DHUSKER]
RobUSMC Offline
New Member

Registered: 07/20/15
Posts: 18
Loc: NC
Sorry man, brain fart on my part! All info was great and I thank all for it! still working out the bugs on how to work this site. Old people!

Rob

Top
#2860903 - 09/12/15 10:17 PM Re: 6x45 Load data [Re: pcammo]
BR Marksman Offline
Predator Master

Registered: 10/31/14
Posts: 51
Loc: Lansing, MI
I'm trying to decide what brass I should use. I picked up some new Winchester 223 brass, but I'm wondering if that will limit the pressures and speed I can get out of this round. Would I be better off getting some 5.56x45mm brass to use instead?

Top
#2860966 - 09/13/15 09:27 AM Re: 6x45 Load data [Re: pcammo]
eneranch Offline
Seasoned Member

Registered: 06/01/09
Posts: 249
Loc: Colorado Springs, CO USA
I don't think it will make a difference.

Top
#2861790 - 09/16/15 01:26 AM Re: 6x45 Load data [Re: RobUSMC]
cb4017 Offline
New Member

Registered: 08/02/15
Posts: 15
Loc: Nevada
Originally Posted By: RobUSMC
Sorry man, brain fart on my part! All info was great and I thank all for it! still working out the bugs on how to work this site. Old people!

Rob


Rob, any data is gratefully accepted. Did you ever get your IMR loads sorted out?
_________________________
Cliff
USN Ret. FPD Ret.

Never underestimate the power of stupid people in large groups.

Top
Page 12 of 18 < 1 2 ... 10 11 12 13 14 ... 17 18 >



Moderator:  Matt1953 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.