300 blackout nech crushing when seating bullet

put a empty and sized case in your press,(no seat die yet) bring the ram all the way up, (top of stroke) then screw seat die down till it touches the case(make sure seat adjustment is backed off.. Then back the seat die up 1 full turn and lock it down. That how you set a seat die..

Jason
 
Originally Posted By: smith1559put a empty and sized case in your press,(no seat die yet) bring the ram all the way up, (top of stroke) then screw seat die down till it touches the case(make sure seat adjustment is backed off.. Then back the seat die up 1 full turn and lock it down. That how you set a seat die..

Jason

Jason, that is all well and good unless the reloader wants to seat and crimp in the same step. IF that is the case (and a lot of those who load for the AR crimp and seat in the same step...) the seater die is adjusted differently.
 
Back
Top