AICS Mags

[ksduckhntr]

I purchased bottom metal for my tikka from atlasworx and it accepts AICS style mags. The rifle it is going on is a 25-06. Does anyone know if the 300wm magazines will work with my 25-06 or know of a better solution? Eventually I want to run a 6.5x55 with the rifle so hoping the mags will work with that as well.

 

[pahntr760]

They should...

http://www.cdiprecisiongunworks.com/faq.html

Under the magazine and caliber information heading, it says 30-06 and 270 win work in the 300 WM mags, so the 25-06 should be fine. The Sweede may be a little short, however, it should still feed.

 

[ksduckhntr]

Thanks for the link. I saw that link before but was second guessing myself.

 

[kyyotestalker]

The 300WM magazine will work but the feed lips will need to me adjusted.

http://www.alphaindmfg.com/store/index.php?route=product/product&path=20&product_id=55

They will adjust there 300wm magazine to 30-06 at time of order just let them know.

 

[ksduckhntr]

Ky- thanks for the link. That is a decent priced mag plus they will help out. Thank you to you two for helping do some research. Now I just need to find a stock for this bad boy.