Predator Masters using UBB.threads ™ Infopop Corporation.
PM Gear Moon & Weather

Welcome to the Predator Masters Forums
Be sure to visit the main Predator Master website at





PM Gear
PM Gear
PM Gear
The Official Predator Masters Search Engine
Search Predator Masters

Page 8 of 18 < 1 2 ... 6 7 8 9 10 ... 17 18 >
Topic Options
#2469398 - 03/24/13 10:24 AM Re: 6x45 Load data [Re: Win.308stealth]
eneranch Offline
Seasoned Member

Registered: 06/01/09
Posts: 249
Loc: Colorado Springs, CO USA
If you look on the last page of the 6x45 Load Data, it explains the color codes.

Top
#2469456 - 03/24/13 11:34 AM Re: 6x45 Load data [Re: pcammo]
Win.308stealth Offline
Seasoned Member

Registered: 01/26/13
Posts: 182
Loc: Fosston MN
Oh, I see. My computer is VERY slow so I never went to the bottom of the booklet. Thanks.

Top
#2487740 - 04/23/13 06:18 PM Re: 6x45 Load data [Re: pcammo]
Tracvision Offline
Junior Member

Registered: 04/22/13
Posts: 25
Loc: Florida
PCAMMO, Thanks for the loading guide. Good stuff. Its guys like you that make this sport fun.

Top
#2496362 - 05/13/13 09:44 AM Re: 6x45 Load data [Re: pcammo]
scatterbrains Offline
New Member

Registered: 06/12/12
Posts: 15
Loc: New germany
Has anyone tried Alliant power pro varmint in the 6x45 yet? I picked some up for the 204r and figured i could give it a shot in my AR.

Top
#2546245 - 09/20/13 12:43 PM Re: 6x45 Load data [Re: scatterbrains]
foxhunter1 Online
Die Hard Member

Registered: 12/20/05
Posts: 671
Loc: new mexico
great thread, i've been shootint the 6x45 and 6x47 since the early 1980"s for coyotes and it is a thumper.


Edited by foxhunter1 (09/20/13 12:44 PM)

Top
#2584593 - 12/08/13 01:06 AM Re: 6x45 Load data [Re: pcammo]
DirtyDave413 Offline
Seasoned Member

Registered: 01/29/13
Posts: 158
Loc: DFW, TX
Great info guys. My next AR will be a 6x45!
What twist rate is working well for the 75-87gr V-max's?
_________________________
Hic Ego Statio

Top
#2588758 - 12/13/13 11:41 AM Re: 6x45 Load data [Re: pcammo]
cedarcreekcooner Offline
Die Hard Member

Registered: 09/07/09
Posts: 861
Loc: iowa
Anyone use any Berger bullets for coyotes in 6x45?

Or the Sierra 60gr HP?

Top
#2591254 - 12/16/13 09:52 PM Re: 6x45 Load data [Re: pcammo]
Tracvision Offline
Junior Member

Registered: 04/22/13
Posts: 25
Loc: Florida
I have a few 6x45s. One is a Dtech. They love the 70 SMK's.

Top
#2614192 - 01/15/14 04:54 PM Re: 6x45 Load Question [Re: XR357]
6mmterry Offline
Seasoned Member

Registered: 11/27/09
Posts: 158
Loc: ohio
I have a 6x 47 (222REM Mag) that I like very much...It is a short action model 10. The barrel was reworked heavy varmint that I had reworked. I have not measured or Chrono any loads but the coyotes and ground hogs I have killed don't know that.

I am hoping to spend more time this spring I am shooting 55 gr in mine but again I don't know speed. I love the cartridge
_________________________
FREEDOM - all gave some and some gave all for our freedoms

Top
#2632075 - 02/07/14 08:35 PM Re: 6x45 Load data [Re: pcammo]
6x45 Fan Offline
New Member

Registered: 02/07/14
Posts: 15
Loc: Fresno, California
I'm new to the 6x45 and I am learning a lot from your information here. My questions are these:
Have any of you tried Accurate's AA2460 for the 6x45, and, if so, how is it working for you? I plan on using the 80 grain Barnes TTSX for hogs and Horandy 58 grain V-Max's for everything up to coyotes out of a Black Hole Weaponry 16" LTM barrel. The burn rate is a tad slower than the AA2230, so, is it a viable powder for the cartridge? I am also planning on trying Varget and IMR 8208XBR, but my questions are for AA2460. Thanks


Edited by 6x45 Fan (02/07/14 08:37 PM)

Top
#2632108 - 02/07/14 09:12 PM Re: 6x45 Load Question [Re: pcammo]
Beach Offline
New Member

Registered: 05/28/12
Posts: 1
Loc: Southern Indiana
Hello,
I'm new to this forum and see that this is an older thread. Is this load data still available? The link shows the destination as temporarily unavailable.
_________________________
Beach

Top
#2632368 - 02/08/14 08:47 AM Re: 6x45 Load data [Re: pcammo]
eneranch Offline
Seasoned Member

Registered: 06/01/09
Posts: 249
Loc: Colorado Springs, CO USA

Top
#2632478 - 02/08/14 12:11 PM Re: 6x45 Load data [Re: pcammo]
6x45 Fan Offline
New Member

Registered: 02/07/14
Posts: 15
Loc: Fresno, California
Thanks. I already have that. No data for AA 2460, though.

Top
#2632481 - 02/08/14 12:20 PM Re: 6x45 Load data [Re: pcammo]
pahntr760 Offline
PM Junkie

Registered: 05/06/09
Posts: 12123
Loc: Osan, ROK
http://www.frfrogspad.com/burnrate.htm
http://www.lapua.com/upload/reloading/reloadingburningratechart2011.pdf
http://www.reloadersnest.com/burnrates.asp

Find comparable powders here. Use their average and work from there.

Looks like H335 and BL(C)-2 or Win748 are on either side of it. Try these numbers and make an average. Work to the top and report back with your results!
_________________________
“It isn't so much that liberals are ignorant. It's just that they know so many things that aren't so.”
- Ronald Reagan

Top
#2632509 - 02/08/14 12:53 PM Re: 6x45 Load data [Re: pcammo]
6x45 Fan Offline
New Member

Registered: 02/07/14
Posts: 15
Loc: Fresno, California
So, using those burn rates, I would look at your data and comparable powders and start there? As an example, a comparable powder is W748 @ 24.7 grains to 27.6 grains would average 26.2 grains for the 80 grain bullet category. So, my starting load for the 2460 should be 26.2 grains. Is my thinking correct? Thanks for the GREAT info and help.

Top
Page 8 of 18 < 1 2 ... 6 7 8 9 10 ... 17 18 >



Moderator:  Matt1953 

© Predator Masters™, All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.