FLIR Scout video output without a hot shoe

[jsr1986]

Hi everyone I am new to this forum and wanted to share a design I have created for the FLIR ps series thermal imager. I have a ps32 and wanted a better way to do video output without having to rig up a hot shoe so I came up with this idea. Basically it is a SMA connector on the bottom of the FLIR that can be wired to any video device. I currently have mine connected to a 5in DVR recorder I bought off ebAy. It works wonders and gives you the ability to either record or take a picture of what the flir sees. Here are pictures of the setup. Please message me if this is something you would be interested in.

 

[the impactzone]

very interested, but don't you void any warranty with that mod, I might have to wait till mine is out of W
how much for the mod?

 

[jsr1986]

Yes the warranty will be voided. I have done several of these mods for people here locally in Phoenix without any issues at all. The cost is $200 and that includes shopping, parts and labor, and a high quality 6 foot shielded cable. At the other end of the cable I can put a male or female rca connector to hook up to a tv, 3.5mm headphones connector, mini 3.5 headphones connector, pretty much any connector you would like

 

[the impactzone]

ok next question? have you done any LS64's ?

 

[jsr1986]

I have not done any ls 32/64's yet but I am able to do the same mod to them. The internals are the same with the exception of the bigger lens on the 64

 

[SkyPup]

very nice!

 

[jsr1986]

Thanks. I made a YouTube video to better demonstrate how it works.