300 WSM load

rgvt4

rgvt4

New member
Need a good load for 300 wsm All i have is H4895 Varget and R19

And only 1 lb of the 19 and 4895

My rifle is a Tikka t3 with 1-11twist Rite now it seems to like 165gr factory stuff the best.

Open to all powder and loads you might have

Thanks

Robert
 
Last edited:
My 300wsm shoots awesome with 62.5 gr H4350 and a 168 gr Nosler BT.

I also shot 63 gr H4350 with a 165 gr Hornady SST. Really tight groups.

My brothers Tikka T3 shoots 72.75 gr R19 with a 165 gr Nosler Partition.

My Dads Browning Xbolt, brothers Tikka, and my Sako A7 all preferred H4350.

I hope that helps.
 
Originally Posted By: GerbsMy 300wsm shoots awesome with 62.5 gr H4350 and a 168 gr Nosler BT.

I also shot 63 gr H4350 with a 165 gr Hornady SST. Really tight groups.

My brothers Tikka T3 shoots 72.75 gr R19 with a 165 gr Nosler Partition.

My Dads Browning Xbolt, brothers Tikka, and my Sako A7 all preferred H4350.

I hope that helps.

It's a start thanks Gerbs
 
Just hoping it helps. I bought a lot of R19 after reading that was an excellent powder for the 300 wsm, which it might be. H4350 just shot so well out of all of them I'm trying to use the R19 in other loads. Good luck, it's a great caliber!
 
I use H-4350 with my 300WSM, 165 & 180 grn bullets. I'd look around that burn rate. If you want to try what you have, there should be some data with Varget & RL-19.
 
Back
Top