Helmet mounted Flir

H

Hard_ware

New member
Here is the mount I am using. Its a standard pvs14 helmet mount attached to the flir unit. I am not sure if this works on all helmets. The screen is diagonal but works great.

ps2_zps8b3b2c1f.jpg
ps1_zps26210102.jpg
ps3_zpse7637dc3.jpg
 
Last edited:
That looks very effective and the J-Arm hold it inline nicely.

I have a Wilcox L-24 mount with the dovetail adapter instead of the bayonet adapter for even more rigidity, also have the Wilcox Steel J-Arm with the dovetail adapter. Will have to try that out!
 
Originally Posted By: Hard_wareI am not sure if this works on most helmets or I just got lucky with the combination of frankin parts I assembled
laugh.gif


I looked at the alignment on that when I made my FLIR bracket but I just assumed there would be viewing issues with the unit mounted at an angle. I made this one fairly quickly and never got back to trying address the J arm in that position.

http://www.predatormastersforums.com/for...590#Post2402590

K2nBG.jpg
 
Last edited:
The angle actually helps with sharper image compared to horizontal. I guess it lowers the nuc level due to the pre programmed settings. It works better for me.
 
Back
Top