coyotewallace
New member
Found this info. else where but thought some folks here might be interest in knowing this. It works! I ordered the tap and it is the right one.
You can get the tap here..
http://www1.mscdirect.com/CGI/NNSRIT?PARTPG=NNSRAR2&PMPXNO=1735758
For drill bit information use this...
"Proper size is .282-.286 diameter. Best fit is 9/32 at .2812 or "K" at .2811 or 7.2mm at .2835.
I=.2720 not a problem in a soft metal."
You can get the tap here..
http://www1.mscdirect.com/CGI/NNSRIT?PARTPG=NNSRAR2&PMPXNO=1735758
For drill bit information use this...
"Proper size is .282-.286 diameter. Best fit is 9/32 at .2812 or "K" at .2811 or 7.2mm at .2835.
I=.2720 not a problem in a soft metal."