Midway Dogtown Bullets

Mark22250

Mark22250

New member
Just wondering if anyone here has tried the 34gr Midway Dogtown Bullets HP in the 204. If so with what results and what powder and load you use. I'm aware it's all different for most rifles, just want a fill of what other are getting. I am shooting a T/C Venture 204 and using Benchmark pwdr. Have tried numerous loads, bullet in more, bullet out more and the best I get is a 3 inch group which is unacceptable.
32gr Hornady V-Max, I can get a 3/4 inch group. Just trying a different bullet.
Thanks
 
I've loaded and shot a lot of the 34gr., but mine were from Midsouth. IMR8208XBR powder is what I used. 3/4" at 100yds. was pretty average. Shot the same when I used H4895.
 
26.5 gr of H335 produced one .5 inch group from my 204 AR. It's got a 1 in 12 twist 24 inch bull barrel. Most groups were around 3/4 to 1 inch.

+1 for the zmax. Just got 1000 of them the other day from Midsouth shooters.
 
Here is the load that I submitted to reloadersnest.com a few years ago:

LoadID

3351

Bullet

Dogtown

Bullet Weight
34 grs

Powder

Benchmark

Powder Weight
27.2 grs

Primer
Rem 6 1/2

Brass Make
Rem

Barrel Length
24 (inches)

Velocity

3875 fps

Group 100 yds
.21 (3 shot) (inches)



Submitted By

Rustydust



Gun Info

Savage 12



Comment

Best load I have found so far.






 
Back
Top