Update:: I have not had any price increase since I started making these. Due to shipping and material cost increases since 2012 I need to raise the cost of these to $15 each shipped effective 06 Dec, 2012

I have some of these available right now. I am offering them for $15 each shipped in the CONUS. Payment can be made by USPS or Pay Pal. They are available in the ACU camo, Digital Desert (Unavailable, Cant find material), Multicam, Woodland camo, Black and now Kryptek Mandrake

I have seen the question come up numerous times asking about a brass catcher that would work for hunting. I made some of these and handed about 8 of them out at the PM hunt for people to test. The feed back was good on them. The brass will either be caught in the bag or fall at your feet. This makes it easy to find that expensive brass. These are made of Cordura material.

I built these to be small and hold one or two pieces of brass. They are designed to catch/deflect the brass while you are on a stand.If you shoot an AR in any caliber but 223 you know how expensive the brass is. Nobody likes to lose it. I have had it catch as many as 13 pieces of brass and hold them.

I am being told that this is also working on the AR 10. It was tested by Wilydawg on his 243. He has made a comment in this ad that it works for his and was catching 5 out of 5 pieces.

First two pictures shows the colors.

Pictures 3 and 4 show it covering the ejection port. The ejection port cover is put into the bag to help hold it in place. The first round will kick it away from the door and then help hold it in place to catch the others. The 5th photo shows how it is hooked around the back side of the scope. You need to make sure it is all the way forward against the hand guard as shown.











This picture shows the opening. This is where the ejection port cover goes in.







[color:#FF0000][/color]

I used one of these at the PM Egg Shoot to catch my expensive Lapua brass. Worked like a champ! Steal of a price on these, to boot.

Tony

So do they catch more or deflect more?? Also do they melt?

Like the idea quick and easy to get on and off.

Mark has a winner here. I have been using one since the pm hunt. I have not lost one piece of brass since I have been using it..

...

I hate losing my brass in the thorn bushes and cactus. I would really like to get a brass catcher. PM sent.....Thanks reb8600!

They catch more but not if you do not install it right. It needs to be under the door or the velcro attached. It is designed to catch the one or two pieces you shoot on a stand. I went to the range today with my 223 and the 6.5 Grendal. I was shooting 5 shot groups. It was catching all 5 rounds most the time. It caught about 80% of my brass. The others dropped straight down. I would say that 95% of the time it caught the first and second round when I put it under the door.

I made some more and updated the original post.

Would these work with an AR-10? If not any chance of building some?

I dont have an AR 10 to test them on so I dont know.

I was able to get one of these from Reb at the PM hunt and they work pretty slick. I like mine Thanks Reb.

Still have some of these available.

Are you still making these? My buddy and I are looking at getting some.

BTW, Happy Birthday

Just seen this post, I would love to have one myself if they are available.

They are still available.

Happy Birthday, Mark.

These things do work nicely when the dust cover is slid into the pocket.

PM sent

Do these ever cause any FTE from the brass getting kicked back into the ejection port?

I havent had any problems with that on the one I use. I also have not heard of any.

Mark I need one of these if you have one left, I'll come over and get it when I get back into town.

I just made some more. Let me know when you are back.

I'd like to pick one of these up from you. PM me details on how to proceed

Mark,

Any chance of some of these in black in the future? I'd be interested in another one.

Shane

I could do that Shane. I will get some material when I get a chance.

I'll take a black one as well when you get them availible.

These are now available in black also.

Made a slight change in the way I put these together. My son in law shot the last 13 rounds I had in my 17 Remington AR and it caught and held all 13 rounds.

Mark,

2x Black, please. Send me PayPal info. They will be shipped to my wife. Thanks!

Shane

I will have these at the PM hunt in Las Cruces. I will have black and camo with me and will sell them for $10 at the hunt. Just locate me there if you want one.

Do you do PayPal? Shoot me a PM if you do.

Thx

PM sent to you. I do pay pal.

I would be interested in a black one also PM Me if you have any available. Will pay with paypal.
Thanks

They are available, sent you a PM.

Mark I had talked to you about 2 in black hope you still have some see you in a couple days and will get them then.
Matt

Anyone try these on slick side upper?

Got mine a couple days ago so I took it out to give it a try. 10 rounds 10 catches. Worked real nice.

I'd like to get one of these if still available. PM coming

Wonder if it will work on my Cetme 308? that gun throws my
LC brass clear into the next county.

These are to small for the AR 10 platform. I am going to build one and let 1953 try it out on his 243. If it works, I will offer them for the AR 10.

If it works on the AR-10 Reb, let me know, I'm in for one...

When I get mine from ya I will let ya know how well it works on the .30RAR too. But mostly got it for my 6x45. Thanks again Mark.

Mark get me your paypal addy and I will buy one from you for my new 25 WSSM.

Thanks

I have been desperately looking for a high quality brass catcher that will work with a side charging AR because I was tired of losing my 6.8 brass!!. I also wanted something that was small and compact because I use my ARs for hunting.

I found the perfect catcher.

reb8600 makes a FANTASTIC catcher which fills all of my requirements. It is compact and extremely well designed. It is ideal for hunting as it is made of thick material which will not catch or snag on all our nasty desert plants.

The design of the catcher allows it to sit perfectly over the side charging handle without interfering. Be it wonderful accident or ingenious design, the arch created by the pocket lifts the backing over the handle. In fact, you can't even tell it is a side-charger with it on.

Because it is laid across the top, it also does not inhibit charging. A simple reach under the catcher for for easy access to the handle. It falls right back into place after charging. I added a small magnet to the pouch and a strip to the magwell to hold the catcher from flopping around while shouldering on hikes. This add-on is not needed, but I thought I could improve it(I didn't).

The only thing that I think would make it better is a more stout strap. But that is just me. Nothing wrong with the current one, just a preference thing.

I know he didn't design it for a side-charger, but in truth, I don't know that a better one could be designed. I find no faults with it.

If you need a catcher for a side-charger( or ANY ar for that matter!) I HIGHLY recommend that you get a hold of reb8600.

Great guy and a tremendous product.

Still have some available. I also made one for the AR 10 and Wilydawg is going to try it out for me to see how it works. Hopefully will have them soon.

I would like one in black. I'll shoot ya a PM! Thanks!

btw, I love that green/tan/white camo job. is that the work of a home "spray can" job??

Yes it is. Used a sponge to apply the colors after painting the tan and green base.

As a field report update -


Reb sent me a larger version of his brass catcher for testing on my larger AR-10 platform. I also have the original version designed for the smaller AR-15.

After trying both of them on this rifle (Remington R-25 in .243) my recommendation to reb was to simplify and sell the original version for both platforms!

The original smaller unit seemed a much better fit and outperformed the larger one hands down. I was able to fire multiple 5 round groups without a single empty hitting the ground or bouncing back into the action.

There was some trouble with 8-9 rounds in the catcher at once, likely due to the sheer volume the larger .243 brass takes up in the pouch. This is a total non-issue for me as the catcher was never really designed for capturing large amounts of brass, and I would rarely if ever fire more than 2-3 rounds in a hunting situation anyway.

AR-10 owners, buy with confidence!

wily

Thanks for the report. I know several members have wanted them for the AR 10. It is nice to hear that these will work.

Lets bring this back up.

I will take one in camo I can paypal you the money.
Gary

I'll take one in camo, let me know where to send PP

Thanks

I need one of these but don't have pay pal

Sent you a PM with my address.

I will take a black one

Up with a new color add, ACU Camo

Do you have any in the Desert ACU camo yet?

That's what I have my gun wripped in and it would match.

I am working on getting some of that and Multicam

I would like one in black for my AR15. PM sent.

Back to the top with 2 new colors

I hope to get one in 'Cruces in a couple of weeks! Sounds like you need to bring a bunch...

I will have some of every color in Las Cruces. They will be $10 for anyone that is there.

I'm going to pick up a couple. See you there.

Will have plenty of these in all colors at the PM convention.

Good, I need another.

Id like to get a couple catchers if u have them available. Pm me if u have any or have any left when u get back

I have some available for shipping also. I sent you a PM

Have plenty built and ready to ship.

Are these still $12 shipped?

Yes they are. Send me a PM if you want one.

Are these the five colors you have available, or are there others?

That are the ones I have.

I need two in black for my AR10's. I'll test them on 260 Remington and 338 Federal.

I'll try one in black. Please send me your PayPal info and total price.

do you still make the brass catchers and the price and where to send the funds thank you jph

I do still have them in all the listed colors. I sent a PM with the information.

PM inbound I need some more

I got one of these for my new AR. I got to the range 2 weeks ago & finally got to try it out.

All I wanted to do with the rifle was get it on paper & then zeroed at 100 yards. I shot 3 rounds at a time, it caught 2 & knocked the 3rd down, so it didn't go far.

Today I got back to the range.

Went to do the JB paste breakin on the rifle.

5 rounds, it caught 4.

Clean, then 10 rounds. It caught all 10.

Clean then 20 rounds. I loaded 2 10 rounds mags. It caught all 10 rounds each (emptied between mags).

Seems to work better the more it gets used

WISHED IT WOULD WORK ON A MINI-14---COULD I MAKE IT WORK ????-----------SVB

I dont know if you could make it work on a mini 14 or not. I dont know anyone that has one to try it on. Sold mine years ago to get an AR. If it is the Ranch model and scoped, possibly might be able to make it work.

It works on an AR with a fixed handle, would be better with a longer bungee:

Hey I want one. Can you PM me the details. Thanks

I like them shooting from a bench, too. Keeps me from having to chase brass & not picking up someone elses.

One of mine is dedicated to my mini-14 ranch rifle. It catches most of my brass and knocks the rest down so they land at my feet. I highly recommend them.

I also like using them off the bench, I'm sure my friends prefer me to use them too! Now they don't get pelted with brass, and they don't have to help pick up anymore.

Used mine this weekend while calling. Sure was nice not to have to chase brass.

I will have these at the PM convention again. The price there will be $10 for those buying them there.

I have all of these in stock and ready to ship.

Bought a few of these and finally had an opportunity to try 2 of them out this weekend. One is

attached to an AR15 the other to an AR10 .243 and they worked great on both. Shot 100 rds from

each rifle and this was the first time I recovered every piece of brass that I started with.

These will definitely pay for themselves over time. Thanks again Mark.

Mike

Have all the listed colors available.

Ordered 2, and had them very quickly. Work as advertised.

Thanks,
Steve

PM sent I would like a black one

I'll take one of whatever color you got the most of.

PM coming

Pm inbound

Got mine today thanks for quick shipping

I need another, but this time in Multicam! I'll message you tomorrow or Wednesday for payment details.

have you made them for the LH stag?

They will fit all AR's. Doesnt matter what brand or if it is l/h or r/h.

Sent a PM Thank you .

PM sent.

Received mine last week. Works great! Thank you.

DITO LOVE them , now my son does not have to hunt for his brass after a stand LOL.

I would like to buy one in digital desert thanks.let me know how to pay you.

I would like to order one in digital desert also

Put me on the list. Want a black one.

Everyone has a PM for payment info.

I want one in woodland cammo because I am tired of moving my other.

Got it this morning. Looks good.
Thank you

How good do these work on a slick side AR10? Thanks

I don't have one so I couldn't tell you how it would work. I know it will work on the AR 10 because a few have done it but I don't know about the slick side one.

Can you pm me with PayPal info and I'll try one ? Thanks

Reb, are you still selling these ? If so I would like 1 in multicam if you have it. If not then woodland would work. Please pm me your PayPal info and I will send you payment. Thanks, Jim

I am still selling them. You have a PM.

If you make'em for a mini 14 --- I'll buy one--PM Me-skip

I have never built one for a mini 14 and don't know if these would work.

That's awsome ,I need one...pm sent. Send me PayPal info....and take any color....Rusty

I have to give props to Mark on his fine product,I went to the range today testing loads for my AR 15 and the brass catcher worked flawlessLy no more picking my brass up off the ground...Excellent product!

Glad to hear it worked for you. They arent perfect but they work great when set up right.

Reb8600,that is a great looking brass catcher design. Can I get one in black.

Mark I just received the brass catcher and going after coyote this weekend. Thanks

Do you have a couple in black? Thanks

I do have some. Sent you a PM.

Hi reb. Do you happen to have one in ACU and one in black available to send to Oregon, and are they still $12 each?

Thanks!

I do have them and yes they are $12 each shipped. Sent you a PM.

Reb, I want 2 also. I sent PM if it went through. Thanks,
JD

Replied to your PM and sent you an email.

Sent a pm to you Reb, Thanks

Please pm info on getting one of your brass catchers and colors available. Thanks

I would like one of these in black, if available.

Up with a new color

Still available

I'd like on in black if they're available. If not any other color will work.

Still available.

Still available

Id take 2. Multicam and kryptek if available

They are available and I sent you a PM

Do these work on BCA side chargers??? Dan

I am not familiar with the BCA. If the handle is going to be under the catcher then I doubt it will work

What colors do you have?

I f you still have some brass catchers left I would like to purchase one for a friend. Black is fine. I need your address and how you want to be paid. Thank you

I bought one of these at the PM Hunt a couple years ago and stashed it in the truck because I didn't have the AR with me. Well during the move it got misplaced, I was putting stuff from boxes onto shelves in the shop and low and behold the brass catcher appeared.

I went to the range today and it is perfect, so light and unobtrusive that you don't know it's there and it works, never had a piece of brass hit the ground until I dumped a bag full of hot brass into to my hand.

Thanks Reb

I need to order another for my grandson (age 27)

PM sent. I need a couple more!!

Geese!! I would love to get a couple of those in BLACK

I would like to order a couple of you are still making them

Sent you a PM