Originally Posted By: chickenlegI was interested in the 6/250 or 6mm international until some research revealed that the 6/250 has some case stretching issues. The ackley treatment fixes that, but then you are still left with a 243'esque neck which is pretty short for the long bullets and causes you to have to crowd your powder space. For the 80-90 gr bullets I would think it would do nicely though, but if I wanted to run the 107's i would look into the 6xc by david tubb. The 6xc has the shoulder pushed back a bit, and a 30 degree shoulder; though the straight wall may not lend itself to an auto loader very well. Ymmv, i have no first hand experience with either of these rounds, just what i have read....on the internet, so it must be true.
There are serveral different versions of the 6 INT out there. I think any of the VLD bullets would be very tough to make work, I personally looking at other cases like the 47mm lapua.