Struggling with the reloading thing

Originally Posted By: 2muchgun42.3gr IMR 4350 has been known to work with those........

100_0198.jpg


Now that right there would make me a happy boy!!
laugh.gif

Yesterday's loads are between 41.5 and 43.0 grains. I started around a max load for a .243 Winchester and went up from there.
 
Last edited:
I've recentally tried IMR4007ssc and really like it a lot. Groups are running well under an inch in both my Rem 700's in .243. Bullets i'm using are between 65 and 70 grains, Berger, Speer, Nosler and a couple of custom benchrest bullets. I think the powders you've listed might be a little on the fast side. 4007ssc is closer to WW760 and H414. You might try a slower burning powder if you have some.
 
I don't want to get all fired up too soon, but I think I might have done something right for once today;
These 3-shot groups were shot at 109 yards this afternoon with the .243 AI:

030.jpg
 
Now yer talkin'. I did not like any of the powders you tried before. IMR 4350 is where it's at, as far as the 243 is concerned.......
 
Back
Top