Hogster scan Handle

Posted by: Alan D

Hogster scan Handle - 01/13/21 12:14 PM

Just made a super simple scan handle from AR grip and Anker lipstick battery . will try and get some picks up of it . thx! Mark
Posted by: Shooter222

Re: Hogster scan Handle - 01/13/21 01:57 PM

Here is his picture .
[img]https://ibb.co/qMF1bfP[/img]
Posted by: Alan D

Re: Hogster scan Handle - 01/13/21 02:36 PM

Thx! for posting ! thought it might be helpful to someone!
Posted by: JTPinTX

Re: Hogster scan Handle - 01/13/21 04:02 PM

Pretty nice. Which Anker battery is that? It looks smaller than the 5000mah battery I have, but maybe not.
Posted by: zhelton

Re: Hogster scan Handle - 01/13/21 08:02 PM

He used the anker 3350 i believe. I have a 5000mah and his was smaller than mine. I orded a smaller anker like this
Posted by: Kirsch

Re: Hogster scan Handle - 01/13/21 09:17 PM

It looks nice. In colder weather, you may not get a night of hunting out of it. The TRB uses a 6700 mAh. If I don't record, I can usually get a full night out of a Hogster/Super Hogster with colder temps. If I am recording while on stand, it won't last all night. Most people probably don't hunt all night as I do and probably aren't hunting in the temps I do. Just mentioning. You could always get another 3350 and swap them out as needed.
Posted by: JTPinTX

Re: Hogster scan Handle - 01/14/21 08:49 AM

The Anker 5000 is 32 mm in diameter and won't fit a 30 mm ring. What is the diameter of the 3350? If it would fit in a 30mm ring (even with some electrical tape wrapped around it or something) that would be great.
Posted by: Gman757

Re: Hogster scan Handle - 01/14/21 09:05 AM

I just got one of these to screw into the tripod mount on the Phenom.



Can be used with a 1/4x20 tapped picatinny rail